Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • MA 223 L - Machine Lab (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Students will complete a series of projects designed to hone the skills needed in industry. They will operate a job shop style machine shop doing work for customers and participate in a final class machining project.
    a section of the Machine Lab course in Machine Technology - MA
    IN 221 - Instrumentation IV (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    WLD 112 - Introduction to Print Reading (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    IN 221 - Instrumentation IV (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    ET 142 - Industrial II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    hmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course will build upon the material introduced in Industrial I with the introduction of programmable logic controllers (PLCs). Students are taught the parts of a PLC and how to set up communication with the computer along with constructing programs in the PLC software. Students will also examin...
    a section of the Industrial II course in Electrical Technology - ET
    IN 210 - Calculus II (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are taught formulas for calculating derivatives, applications of derivatives, anti-differentiation, trigonometric functions, and definite integral calculus.
    IT 121 - Electronics Fundamentals II Lab (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to practical advanced electronic circuits in a lab environment. Students will use advanced electronic components (diodes, transistors, integrated circuits, op-amps) to construct digital circuits and use application/test equi...
    MA 601 - Geo Dimens. & Tolerancing II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Geometric tolerances, form, orientation, profile, runout, and location.
    AU 110 - Intro to Automotive Technology (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    gener Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Sam Perez Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    AU 112 - Basic Automotive Electrical Systems (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    IT 223 - Cisco Networking III Lab (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    gana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course introduces higher end networking concepts to the CCNA networking students like network design and architecture. Networks running dynamic routing protocols using RIP, EIGRP, and OSPF though a NAT enabled router will be covered. The student will also gain knowledge to configure secure scal...
    IN 140 - Physics II (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    IT 130 - Computer Hardware Fundamentals (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Theory, operation, assembly, and maintenance of personal computer hardware and peripheral devices are introduced. Preparation for the CompTIA A+ certification. Computer hardware installation and troubleshooting is demonstrated as students learn the theory of operation.
    IN 142 - Instrumentation II (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    ITC 130 - Computers: Hardware & Software (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    oit Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Theory, operation, assembly, and maintenance of personal computer hardware and peripheral devices, in a hands-on lab environment. Preparation for the CompTIA A+ certification. Hardware installation and troubleshooting is accomplished which allows the student to apply the technical knowledge acquired...
    IN 122 L - Lab & Shop Projects (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    tchinson Email Email More info More Info
    Max E. York Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    BTA 213 - Computerized Accounting Concepts (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course will provide a hands-on approach to learning QuickBooks that incorporates a thorough understanding of the software while applying knowledge of the accounting cycle.
    ET 234 L - Construction II (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    ...Students will take part in on-the-job training projects doing handson electrical wiring installations in residential and commercial buildings. Students are required to have 100% supervision by a (01) journey level electrician employed by Perry Technical Institute while performing these electrical in...
    a section of the Construction II course in Electrical Technology - ET
    RE 110 - Refrigeration Fundamentals (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    ...In this comprehensive course, students delve into the core principles of HVAC. They gain an understanding of heat transfer mechanisms, thermodynamics laws, gas laws, BTUs, pressure, and refrigerants. Mathematical concepts are applied to practical electrical theory and the operation of series and par...
    ET 231 - NEC/Utility (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    ...This course will discuss the code requirements for wiring a dwelling unit, photovoltaic systems and cover articles relating to commercial wiring methods. The minimum standards of outdoor branch circuits and feeders, services, grounding and bonding, hazardous locations, and pools will also be covered...
    a section of the NEC/Utility course in Electrical Technology - ET
    PM 133 L - Machine Lab (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Students will complete a series of projects designed to hone the skills needed in industry. They will machine a series of precision parts on CNC machining and turning centers.
    PM 122 - Machine Tool Practices II (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Covers operation and setup theories of the vertical milling machine. Topics covered include face milling, rough/finish milling, hole layout, offset boring head, drilling, and tapping. Also covered are heat treating of materials, material properties, and material application. Introductions to the hor...
    PL 130 - Water Supply Systems (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Mr. Kasey Johns Email Email More info More Info
    Lee Crane Email Email More info More Info
    In this course, students will be introduced to water treatment and well pump systems and the tools utilized on water supply systems. Students are taught about water pressure, hydrostatic pressure, basement water mains, and pressure-reducing valves.
    a section of the Water Supply Systems course in Plumbing Technician - PL
    ET 112 - Electrical Theory I (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:06 PM @ *
    ker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    AU 132 - Automotive & Light Duty Diesel (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    ...This course covers the diagnostic and repair procedures for automotive and light duty diesel engines. Topics include common tools and practices used while servicing diesel engines. Students will identify and learn the variances of today’s diesel fuels. Base engine fundamentals and condition diag...
    IN 111 - Electrical Fundamentals I (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Introduces electric circuits, starting with the nature of electricity, Ohm’s Law and electrical calculations, conductors, insulators, and resistors, series resistive circuits, parallel resistive circuits, series- parallel resistive circuits, voltage cells, and batteries. Network analysis techniques ...
    RE 130 - Resident & Light Commercial HVAC I (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Ignacio Lopez, Jr. Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...In this foundational course, students continue learning the safe handling of refrigerants and proper HVAC system charging, including recovery and applications of refrigerants. The course covers the fundamentals of humidification and air filtration, encompassing various types of air filters, from dis...
    WLD 142 E - Externship (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    er Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Welding Technology - WLD
    RE 220 - Commercial Refrigeration II (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    Jairo Ismael Torres Email Email More info More Info
    ...Building upon the foundation laid in Commercial Refrigeration I, this course delves into advanced commercial refrigeration. Students explore medium temperature and low-temperature applications in greater depth, with a focus on identifying refrigeration flow problems and understanding standard operat...
    PM 110 - Industrial Mathematics I (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Operations with fractions, mixed numbers, and decimals as they relate to the machine trades. The topics covered are the basic math skills of addition, subtraction, multiplication, and division. Calculations involving exponents are also covered as well as the fundamentals of algebra found in the mach...
    ET 212 - Industrial III (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    This course will outline the fundamentals and functions of variable frequency drives (VFDs) and interpreting manufacturer manuals. Students will troubleshoot poor power quality and harmonics along with learning skills to correct these symptoms using power quality analyzers.
    a section of the Industrial III course in Electrical Technology - ET
    IT 230 - Infrastructure & Cabling Standards (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Equips the student to pursue careers in the network infrastructure industry. Cabling applications, installation and testing are covered. The history of the industry and industry terms are presented. National Electrical Code and industry cabling and equipment standards are covered.
    MA 232 - Mastercam Mill Level Three I (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students use Mastercam to create three-dimensional wireframe geometry and surfaces. The proper uses of stock setup, tool libraries, and toolpath verification are also taught.
    ET 133 L - Lab & Shop Projects (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Charles Espinoza Email Email More info More Info
    ...Using ladder diagrams designed in class, students install the wiring to motor control lab stations for various applications and processes. After completion of the lab, the instructor will bug the station and students will apply troubleshooting skills learned in the classroom to locate and repair the...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MA 211 - CNC Machine Tool Operation I (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Manual programming and operation of CNC machining centers. Topics include defining numerical control, machine types and layouts, coordinate geometry, basic machine control features, programming codes, and structure.
    ET 111 - NEC/WAC/RCW (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    MED 142 - Pharmacology I (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    npohar Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...Provides a basic knowledge of pharmacology, including the legal and ethical issues; terms and abbreviations; involvement of governmental agencies; role of providers and allied health professionals; and reading, interpreting and documenting medication orders. This class includes the administration of...
    a section of the Pharmacology I course in Medical Assistant - MED
    AET 110 - Intro to Agricultural Equipment (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Michael John Roy Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    MOA 110 - Computer Applications (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course covers the basics of computer hardware and software, networks, the internet, Outlook, Word, and Excel. Completion of the PTI 101 Workshop is encouraged.
    AU 140 - Automotive Drivetrain Systems (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    ...This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drivetrains and the use of appropriate service tools and equipment. This course will also cover manual...
    ET 121 - NEC (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    AU 120 - Automotive Chassis Systems (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    IN 402 - Calculus I (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Lock-out-tag-out, electrical symbols, ladder diagramming, contactors, single phase, three phase and DC motors, variable speed devices.
    a section of the Calculus I course in Industrial Computing & Process - IN
    IN 242 - Employment Preparation (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    ITC 705 L - Laboratory Instruction (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom to industry standard telephone systems and related equipment. Hands-on experience with industry standard tools and practices is accomplished in the installation of copper and fiber optic cable systems for voice and data networks. N...
    EL 211 - NEC & Load Sizing Calculations (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Covering code Articles 220 and 240, calculating the ampacity of service conductors, feeder conductors, branch circuit conductor, and the ampacity rating of the panels and load centers they supply, including the overcurrent devices used for protection.
    MED 136 - Human Body in Health & Disease II (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    npohar Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course is a continuationg of MED 126.
    ET 221 - Professional Development (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    IN 112 L - Lab & Shop Projects (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    John D. Koenes Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    WLD 110 - Introduction to Welding (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    y Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    What

    Click on a content type above to refine your results.