Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • ET 110 - Safety (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...This course will provide an understanding of electricity and how to prevent common electrical/workplace hazards. Students will be introduced to safety requirements for campus, classroom, lab, and shop environments including the use of tools/equipment, and safety procedures. Weekly safety meetings ar...
    a section of the Safety course in Electrical Technology - ET
    IN 212 - Motor Control (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    IT 233 - Low Voltage Systems I Lab (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Application of technical knowledge acquired in the classroom is applied to various systems and equipment in a lab environment. Students are provided with hands-on experience and demonstrate comprehension in the installation and programming of several low voltage and communication systems.
    IN 120 - Solid State Devices (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    tchinson Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    MED 127 - Office Administration (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Lilia Ornelas Email Email More info More Info
    This course is designed to teach students reception duties, the operation of office equipment, collections, financial management, and basic math skills as they relate to medical assistant duties.
    a section of the Office Administration course in Medical Assistant - MED
    WLD 114 - Cutting, Gouging & Torch Techniques (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    Riley Morris Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    This course covers manual and semi-automatic cutting operations such as oxyfuel, plasma, carbon-arc cutting/gouging and lancing. Students are given the opportunity to develop skills using band saws, iron workers, and related metal working equipment.
    AET 132 E - Externship (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Miller Email Email More info More Info
    matt Bishop Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    Jerry Nelson Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    IN 703 L - Lab & Shop Projects (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Sanchez-Torres Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Classroom theory is applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    IN 140 - Physics II (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    WLD 110 - Introduction to Welding (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Scott Scott Nathlich Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Mariane C. Sugihara Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    IN 141 - Calculus I (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students learn analytic geometry, equations of curves, curve sketching, functions, and derivatives.
    a section of the Calculus I course in Industrial Computing & Process - IN
    EL 131 - NEC Articles 430 & 440 (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...NEC Article 430 – Motor feeder short-circuit and ground fault 24 protection; motor disconnecting means; and motor branch circuit, short-circuit, and ground-fault protection. NEC Article 440 – Code section applying to sizing the conductor and protection to central electric space heating equipme...
    ET 213 L - Lab & Shop Projects (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    esney Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    RE 231 L - Lab & Shop Projects (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    ...This course allows students to receive hands-on experience operating, servicing, and repairing industrial heating and cooling systems. It allows students to apply the knowledge and skills they have learned in a practical setting to functioning labs and equipment. The related projects in the course w...
    ET 223 L - Lab & Shop Projects (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a href="(@@emailUrl5e1a5114-4ab1-45f4-a312-c3443465a809@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will have the opportunity to practice wiring transformers and generating electricity with photovoltaic systems. Students will also utilize thermal imaging technology to diagnose potential issues and develop plans for remedy and repair.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MED 144 - Practice Management & EHR (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Lilia Ornelas Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Overview of commonly available software tools used in health care. Introduction to the electronic health record process and medical office database management software found in American health care delivery.
    MED 223 E - Externship (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Medical Assistant - MED
    BTA 214 - Federal Tax Accounting (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course will introduce students to the fundamentals of tax accounting. Coursework will focus on individual returns, income and exclusions, business income and expenses, deductions and credits, capital gains and losses, corporate tax, and tax administration and planning.
    AU 120 - Automotive Chassis Systems (2019 Spring Quarter)
    Mon, Tue, Wed, Thu, Sat: 4:30-10:00 PM @ *
    ell Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    BTA 110 - Computer Applications (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course introduces the basics of computer usage and provides training for Microsoft Outlook, OneDrive, and Publisher, along with Adobe Acrobat Reader. The objective is to allow students to be more comfortable working with personal computers daily. Completion of the PTI 101 Workshop is encouraged...
    EL 403 - Transformer Connections (2013-2014 SUMMER TRIMESTER)
    The lead identification at additive transformers. Reason for hooking transformers in wye and delta connections.
    ITC 211 L - Cisco Laboratory Instruction I (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    Application of the technical knowledge acquired in Cisco Networking I.
    WLD 121 - Gas Metal Arc Welding (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    Clayton LeGrand Houston Email Email More info More Info
    Jill Wheeling Email Email More info More Info
    Students receive instruction regarding the process and theory of gas metal arc welding. Students will be exposed to related equipment, setup procedures, and safety requirements. During this course students will also be introduced to the fundamentals and practices of pipe welding.
    a section of the Gas Metal Arc Welding course in Welding Technology - WLD
    RE 141 L - Lab & Shop Projects (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    e Benge Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...This course helps students apply the knowledge learned in the classroom to operational HVAC equipment. All laboratory/shop tasks will be performed on heating systems that include fossil fuel units such as natural, LP gas units, oil heating systems, electric heating, and heat pump systems. The scope ...
    AET 123 E - Externship (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rres Email Email More info More Info
    matt Bishop Email Email More info More Info
    Jerry Nelson Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    ET 210 - Safety (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    ...Students will explore safety in an industrial setting such as meter use, personal protective equipment, and lock- out, tag-out, try-out. The Electrical Department holds weekly safety meetings that include a safety demonstration to show the correct way to use tools, ladders, and other equipment neede...
    a section of the Safety course in Electrical Technology - ET
    IN 233 L - Lab & Shop Projects (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    MED 143 - Clinical Procedures I (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Lashel Church Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Demonstrations are provided on assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measure or vital signs, auditory and visual testing, exam room preparation, equipment set-up, and proper positioning and draping of patients. Patient c...
    a section of the Clinical Procedures I course in Medical Assistant - MED
    IN 232 L - Lab & Shop Projects (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    alt Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Classroom theory is applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    WLD 110 - Introduction to Welding (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    MOA 137 - Medical Reimbursement I (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...Students will study federal, state, and private health insurance plans including managed care systems. Students are taught the processing cycle of health insurance claims, health insurance terminology, reimbursement methodologies for professional services, and proper completion of the 1500 billing f...
    BTA 630 E - Externship (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Externship
    a section of the Externship course in BUSINESS TECH. & ACCOUNTING - BTA
    RE 140 - Resident & Light Commerical HVAC II (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Ignacio Lopez, Jr. Email Email More info More Info
    ...In this section, students delve into heating systems, including fossil fuel units such as natural gas, LP gas, oil heating systems, electric heating, and heat pump systems. The course covers the combustion and venting process in relation to fossil fuel heating systems and introduces duct design prin...
    ITC 231 - Voice Communication Systems I (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 3-3:30 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Installation, programming, and troubleshooting of business telephone systems including key systems, hybrids, and an introduction to PBX switching equipment in a simulated business environment. Transmission lines and long distance networks, which tie telephone switches together, are covered. Cus...
    IN 220 - Industrial Computing I (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Curriculum explores configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators.
    ET 130 - Safety (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Students will explore safety in an industrial setting, covering topics such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrica...
    a section of the Safety course in Electrical Technology - ET
    IN 211 - Instrumentation III (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    EL 233 L - Lab & Shop Projects (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    ...Lab time will give students the opportunity to apply the use of training equipment including oscilloscopes, signal generators and DC power supplies, used with solid state components to determine how and why they operate. Introducing green technology with solar energy sources and storing and con...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    RE 243 E - Externship (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    ...Students can accept a position as a HVAC/R technician and work in industry under a training externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required as well as some assigned course activities. To be eligible for an externship...
    a section of the Externship course in Refrigeration Technology - RE
    ET 220 - Safety (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Anthony Altamirano Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration indicating the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    MED 136 - Human Body in Health & Disease II (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Lashel Church Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    This course is a continuationg of MED 126.
    MA 704 E - Externship (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    ...Students work in various local machine shops under the supervision of an approved employer. They must maintain a minimum GPA of 3.0 and not be on any probation contract in order to eligible to participate in an externship. The instructor or administration may terminate the externship at any time...
    a section of the Externship course in Machine Technology - MA
    CST 110 - Introduction to Construction (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, systems, and terms of the construction industry. Topics include the building process, materials, building systems, and construction components. Completion of the ...
    MOA 112 - Keyboarding (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    In this course, students learn beginning typing and 10-key skills. The objectives are for students to learn how to type by touch and how to take a timed keyboarding test for accuracy and speed.
    IN 110 - Math for Electronics (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    e Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    IN 112 L - Lab & Shop Projects (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    ITC 130 - Computers: Hardware & Software (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl1b3e17c3-c19a-482f-a796-ba28c1811479@)">Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Theory, operation, assembly, and maintenance of personal computer hardware and peripheral devices, in a hands-on lab environment. Preparation for the CompTIA A+ certification. Hardware installation and troubleshooting is accomplished which allows the student to apply the technical knowledge acquired...
    AET 131 - Power Train Theory I (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    In this course, students should develop an understanding of transmissions, clutches, and sliding gears. Students will be exposed to the design, operation, adjustment, and maintenance of powertrain systems.
    IN 132 - Instrumentation I (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    ET 112 - Electrical Theory I (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    What

    Click on a content type above to refine your results.