Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • IN 131 - Physics I (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Physical relationships including technical mathematics, uncertainties in measurement, friction, equilibrium, torque, uniformly accelerated motion, projectile motion, trajectories, weight, force, and mass relationships are covered in this section of physics.
    a section of the Physics I course in Industrial Computing & Process - IN
    ET 210 - Safety (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Students will explore safety in an industrial setting such as meter use, personal protective equipment, and lock- out, tag-out, try-out. The Electrical Department holds weekly safety meetings that include a safety demonstration to show the correct way to use tools, ladders, and other equipment neede...
    a section of the Safety course in Electrical Technology - ET
    MD 114 - Clinical Procedures I (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    tz Email Email More info More Info
    Adilene Esperanza Huerta Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    ...Demonstrations are provided for assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measuring vital signs, EKG, medication administration, obtaining specimens. Patient charting and documentation using Electronic Health Records (EHR) is al...
    a section of the Clinical Procedures I course in Medical Assistant - MD
    WLD 121 - Gas Metal Arc Welding (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    on Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Clayton LeGrand Houston Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Students receive instruction regarding the process and theory of gas metal arc welding. Students will be exposed to related equipment, setup procedures, and safety requirements. During this course students will also be introduced to the fundamentals and practices of pipe welding.
    a section of the Gas Metal Arc Welding course in Welding Technology - WLD
    WLD 112 - Introduction to Print Reading (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Brody Sorenson Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    MA 240 - Geo Dimensioning & Tolerancing IV (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    A continuation of Geometric Dimensioning & Tolerancing III, this course further develops the geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics covered are location tolerances, profile tolerances, and run-out tolerance.
    ET 112 - Electrical Theory I (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    man Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    IT 234 - Human Relations (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...Human Relations will assist students in developing the personal and professional skills necessary for business success. Topics include confidence building, self-concept, and self-esteem, building positive attitudes, motivation, and effective leadership. This course is also designed to prepare the st...
    IT 132 - Computer Software Fundamentals (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Installation, operation, management and troubleshooting of computer operating systems and software applications are introduced. Preparation for the CompTIA A+ certification. Different operating systems, configurations and virtualization software are demonstrated as students learn the theory of opera...
    ITC 233 L - Laboratory Instruction (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom to industry standard telephone systems and related equipment. Hands-on experience with industry standard tools and practices is accomplished in the installation of copper and fiber optic cable systems for voice and data networks. ...
    BTA 214 - Federal Tax Accounting (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course will introduce students to the fundamentals of tax accounting. Coursework will focus on individual returns, income and exclusions, business income and expenses, deductions and credits, capital gains and losses, corporate tax, and tax administration and planning.
    IN 212 - Motor Control (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    EL 502 - Variable Speed Drives (2014-2015 FALL TRIMESTER)
    Mon, Tue, Wed, Thu: 7-4:00 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Ms. Christine Sarah Cote Email Email More info More Info
    Variable Speed Drives
    BTA 134 - Business Communications (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl20198be5-637a-4e2b-99e2-e3d056da4479@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students learn various forms of written business communications and effective verbal communications including emails, memos, and letters using real life scenarios and case studies, and working effectively in teams.
    AET 131 - Power Train Theory I (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Rundgren Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    In this course, students should develop an understanding of transmissions, clutches, and sliding gears. Students will be exposed to the design, operation, adjustment, and maintenance of powertrain systems.
    WLD 110 - Introduction to Welding (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    ET 241 E - Externship (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Travis Rohn Email Email More info More Info
    Dan B. Lovestrand Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    Nicholas Tyler Marney Email Email More info More Info
    ...Students are eligible to accept a position as an electrician and work in the field under a training externship agreement with Perry Technical Institute, the employer, and the student. Completion of an externship packet is required. For students that wish to meet the requirements of the Department of...
    a section of the Externship course in Electrical Technology - ET
    CST 131 - Construction Fundamentals III (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Darin Peters Email Email More info More Info
    ...In this course, students will continue learning construction techniques and specifically focus on precision cutting where they learn how to be more precise as here is where the installation of products are visible. In addition, students will learn about developing a building envelope. Students will ...
    IN 110 - Math for Electronics (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Patrick C. Wise Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    EL 141 - Programmable Logic Controllers (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    ...The programmable logic controller, focusing on Allen-Bradley SLC500 series, various small fixed I/O type PLCs. The software covered is RsLogix500, and RsLinx. Programming concepts range from programming of discrete I/Os to the use of analog I/O. Troubleshooting and how to construct programs with...
    WLD 142 E - Externship (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Welding Technology - WLD
    IT 144 - Communications (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 10:10-11:20 AM @ *
    whouse Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course will focus on the basics of technical writing and documentation, along with verbal communications and working as a team. Students study and apply communication techniques, problem resolution skills, and how to handle difficult situations with an emphasis on customer service. This course ...
    BTA 114 - Business English I (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course emphasizes basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate a grasp of basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum of errors in sentence str...
    IN 143 L - Lab & Shop Projects (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    IT 144 - Communications (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 10:10-11:20 AM @ *
    whouse Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course will focus on the basics of technical writing and documentation, along with verbal communications and working as a team. Students study and apply communication techniques, problem resolution skills, and how to handle difficult situations with an emphasis on customer service. This course ...
    IT 132 - Computer Software Fundamentals (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Installation, operation, management and troubleshooting of computer operating systems and software applications are introduced. Preparation for the CompTIA A+ certification. Different operating systems, configurations and virtualization software are demonstrated as students learn the theory of opera...
    WLD 122 - Shielded Metal Arc & Pipe Welding (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Clayton LeGrand Houston Email Email More info More Info
    Branden Lee Calahan Email Email More info More Info
    Students receive instruction regarding the process and theory of shielded metal arc welding. Students will be exposed to the related equipment, setup procedures, and safety requirements. During this course students will also be introduced to the fundamentals and practices of pipe welding.
    PM 112 - Machine Tool Practices I (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    BTA 121 - Keyboarding II (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    In this course, students learn how to improve their accuracy and typing/10-key speed. Students also learn formatting for personal and business letters, memoranda, simple tabulation techniques, proofreading, and editing.
    MA 503 - Mastercam Mill Level One I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Tool design methods, tool making practices, tooling materials, design of cutting tools, gauges, and gauge design, locating and clamping methods.
    ET 222 - Electrical Theory III (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Matthew William Hanshew Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    EL 124 L - Lab & Shop Projects (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Using ladder diagrams, students install the wiring to motor control lab stations. Students will also perform troubleshooting after the instructor bugs the station.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    MA 703 - Mastercam Mill Level Three I (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Students use Mastercam to create three-dimensional wireframe geometry and surfaces. The proper uses of stock setup, tool libraries, and toolpath verification are also taught.
    IN 131 - Physics I (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Physical relationships including technical mathematics, uncertainties in measurement, friction, equilibrium, torque, uniformly accelerated motion, projectile motion, trajectories, weight, force, and mass relationships are covered in this section of physics.
    a section of the Physics I course in Industrial Computing & Process - IN
    ET 212 - Industrial III (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Adam Rieker Email Email More info More Info
    This course will outline the fundamentals and functions of variable frequency drives (VFDs) and interpreting manufacturer manuals. Students will troubleshoot poor power quality and harmonics along with learning skills to correct these symptoms using power quality analyzers.
    a section of the Industrial III course in Electrical Technology - ET
    BTA 113 - Spreadsheets (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...Students learn how to use Microsoft Excel for basic and more advanced spreadsheet creation including tables, charts, PivotTables, and PivotCharts. Students will practice creating formulas using absolute and relative cell references and using functions like COUNTIF and VLOOKUP to answer questions and...
    a section of the Spreadsheets course in BUSINESS TECH. & ACCOUNTING - BTA
    AU 140 - Automotive Drivetrain Systems (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 AM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drivetrains and the use of appropriate service tools and equipment. This course will also cover manual...
    RE 131 L - Lab & Shop Projects (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    Cheyenne Carole Benge Email Email More info More Info
    ...This practical laboratory course focuses on applying control strategies to wire and operate HVAC equipment. Students develop a wide range of wiring diagrams, using actual HVAC units. They gain hands-on experience with heat pumps, oil, gas, and electric forced air HVAC systems. Typical lab projects i...
    IN 132 - Instrumentation I (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    AU 131 - Automotive Climate Control Systems (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    ...This course covers the theory of refrigeration and heating, including manual and electronic climate control systems. Students are taught the importance of recovery and recycling refrigerant as well as adhering to safety and environmental regulations. Upon completion, students should be able to diagn...
    EL 406 - Utility Regulations & WAC Code RuleCode Rules (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrl66dfc2d1-7d1a-4906-8436-3f1a536b125d@)">Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Requirements of our local serving utility, Pacific Power & Light. Topics covered will include but are not limited to, service lateral burial depths, overhead service height requirements, conduit sizing in relation to service ampacities, use of rigid metal conduit, use of PVC conduit, CT installatio...
    RE 220 - Commercial Refrigeration II (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    Jairo Ismael Torres Email Email More info More Info
    ...Building upon the foundation laid in Commercial Refrigeration I, this course delves into advanced commercial refrigeration. Students explore medium temperature and low-temperature applications in greater depth, with a focus on identifying refrigeration flow problems and understanding standard operat...
    AU 120 - Automotive Chassis Systems (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Sam Perez Email Email More info More Info
    Mr. Ken I. Waggener Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    IT 131 - Computer Hardware Fundamentals Lab (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to computer hardware in a lab environment. Students will install, configure, and troubleshoot multiple types of computer hardware and devices (cases, power supplies, mainboards, memory, peripheral cards, processors) to verif...
    IT 143 - Network Server OS Services Lab (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating system services in a lab environment. Students will demonstrate additional advanced services, utilities and administration of various network architectures/topologies in virtualized environments, ...
    PM 123 L - Machine Lab (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    RE 231 L - Lab & Shop Projects (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    ling Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    ...This course allows students to receive hands-on experience operating, servicing, and repairing industrial heating and cooling systems. It allows students to apply the knowledge and skills they have learned in a practical setting to functioning labs and equipment. The related projects in the course w...
    WLD 131 - Gas Tungsten Arc Welding (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    thlich Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mariane C. Sugihara Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Students gain the knowledge to apply the selection of tungsten, polarity, gas, and proper filler rod. They will perform fillet and groove welds with various electrodes and filler materials on mild steel, stainless steel, and aluminum.
    AU 111 - Automotive Engine Repair (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-1:00 PM @ *
    Email Email More info More Info
    Sam Perez Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    What

    Click on a content type above to refine your results.