Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • AET 110 - Intro to Agricultural Equipment (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Michael John Roy Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    MOA 110 - Computer Applications (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course covers the basics of computer hardware and software, networks, the internet, Outlook, Word, and Excel. Completion of the PTI 101 Workshop is encouraged.
    AU 140 - Automotive Drivetrain Systems (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    ...This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drivetrains and the use of appropriate service tools and equipment. This course will also cover manual...
    ET 121 - NEC (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    AU 120 - Automotive Chassis Systems (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    IN 402 - Calculus I (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Lock-out-tag-out, electrical symbols, ladder diagramming, contactors, single phase, three phase and DC motors, variable speed devices.
    a section of the Calculus I course in Industrial Computing & Process - IN
    IN 242 - Employment Preparation (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    ITC 705 L - Laboratory Instruction (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom to industry standard telephone systems and related equipment. Hands-on experience with industry standard tools and practices is accomplished in the installation of copper and fiber optic cable systems for voice and data networks. N...
    EL 211 - NEC & Load Sizing Calculations (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Covering code Articles 220 and 240, calculating the ampacity of service conductors, feeder conductors, branch circuit conductor, and the ampacity rating of the panels and load centers they supply, including the overcurrent devices used for protection.
    MED 136 - Human Body in Health & Disease II (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    npohar Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course is a continuationg of MED 126.
    ET 221 - Professional Development (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    IN 112 L - Lab & Shop Projects (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    John D. Koenes Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    WLD 110 - Introduction to Welding (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    y Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    MA 211 - CNC Machine Tool Operation I (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Manual programming and operation of CNC machining centers. Topics include defining numerical control, machine types and layouts, coordinate geometry, basic machine control features, programming codes, and structure.
    IN 111 - Electrical Fundamentals I (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Introduces electric circuits, starting with the nature of electricity, Ohm’s Law and electrical calculations, conductors, insulators, and resistors, series resistive circuits, parallel resistive circuits, series- parallel resistive circuits, voltage cells, and batteries. Network analysis techniques ...
    ET 210 - Safety (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Students will explore safety in an industrial setting such as meter use, personal protective equipment, and lock- out, tag-out, try-out. The Electrical Department holds weekly safety meetings that include a safety demonstration to show the correct way to use tools, ladders, and other equipment neede...
    a section of the Safety course in Electrical Technology - ET
    BTA 130 - Fundamentals of Accounting (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tori Bower Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...In an introduction to accounting, students are taught accounting concepts and procedures to include debits and credits, the general journal, general ledger, accounting cycle, banking and cash handling procedures, and payroll entries. The objective of this course is to give students a foundation in a...
    IN 140 - Physics II (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    ET 132 - Industrial I (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    David Richins Email Email More info More Info
    ...Industrial I introduces the principles of two- and three-wire control for motor control circuits. The course will identify various control components such as relays, mag-starters, timers, and sensors, along with the symbols and ladder diagrams needed to make a successful control installation. Studen...
    a section of the Industrial I course in Electrical Technology - ET
    MOA 141 - Basic Diagnostic Coding (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    berg Email Email More info More Info
    Lashel Church Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course is an introduction to basic diagnostic coding and presents students with the characteristics and conventions of ICD-9-CM and ICD-10-CM (International Classification of Diseases, 9th and 10th Edition, Clinical Modification), and other diagnosis coding systems or code sets (DSM-IV, ICD...
    PL 110 - Introduction to Plumbing (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    s Email Email More info More Info
    ...Students will meet the requirements of the Occupational Safety and Health Administration (OSHA) for workplace safety. In addition, students will review the history, work performed, responsibilities, and safety principles associated with plumbing and pipefitting. Completion of the PTI 101 Workshop is...
    EL 211 - NEC & Load Sizing Calculations (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Covering code Articles 220 and 240, calculating the ampacity of service conductors, feeder conductors, branch circuit conductor, and the ampacity rating of the panels and load centers they supply, including the overcurrent devices used for protection.
    PM 111 - Elementary Blueprint Reading I (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Develops the skills needed to read and interpret industrial drawings. Topics covered include drawing layouts, drawing symbols, and the different drawing views used to describe machined parts.
    EL 131 - NEC Articles 430 & 440 (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...NEC Article 430 – Motor feeder short-circuit and ground fault 24 protection; motor disconnecting means; and motor branch circuit, short-circuit, and ground-fault protection. NEC Article 440 – Code section applying to sizing the conductor and protection to central electric space heating equipme...
    IT 141 - Network Server OS Configuration Lab (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating systems in a lab environment. Students will install, configure, manage, and troubleshoot multiple types of network server operating systems and virtual networks to verify operation and prove theor...
    MOA 126 - Intro to CPT & ICD-10 Coding (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    This course is an introduction to basic coding concepts. Focus is placed on using official coding guidelines correctly and the course includes extensive practice coding exercises.
    AET 121 - Fuel Systems (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    Everardo M. Torres Email Email More info More Info
    matt Bishop Email Email More info More Info
    This course focuses on fuel system theory, design, maintenance, diagnosis, and repair of mechanical and electronic fuel systems used in agriculture and construction equipment.
    a section of the Fuel Systems course in Agricultural Equipment Tech - AET
    PM 132 - Mastercam Mill Level One I (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    PM 110 - Industrial Mathematics I (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    ...Operations with fractions, mixed numbers, and decimals as they relate to the machine trades. The topics covered are the basic math skills of addition, subtraction, multiplication, and division. Calculations involving exponents are also covered as well as the fundamentals of algebra found in the mach...
    BTA 121 - Keyboarding II (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    In this course, students learn how to improve their accuracy and typing/10-key speed. Students also learn formatting for personal and business letters, memoranda, simple tabulation techniques, proofreading, and editing.
    IN 242 - Employment Preparation (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    WLD 140 - Fabrication Techniques (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Brody Sorenson Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    EL 216 - NEC 690 & WAC (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ PTI
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...NEC Article 690 - Solar photovoltaic systems including the array cirtcuit, inverter, and controller. Washington Administrative Code (WAC) and Revised Code of Washington (RCW) requirements for the electrical industry including, but not limited to: electrical industry scopes of work, licensing qualifi...
    a section of the NEC 690 & WAC course in Electrical Technology - EL
    ET 231 - NEC/Utility (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a href="(@@emailUrl5e1a5114-4ab1-45f4-a312-c3443465a809@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course will discuss the code requirements for wiring a dwelling unit, photovoltaic systems and cover articles relating to commercial wiring methods. The minimum standards of outdoor branch circuits and feeders, services, grounding and bonding, hazardous locations, and pools will also be covered...
    a section of the NEC/Utility course in Electrical Technology - ET
    IT 122 - Wireless Technology (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Radio frequency theory, noise, bandwidth, analog, and digital modulators are introduced. RF transmission and reception, propagation, transmission lines, and antenna systems are covered.
    MOA 112 - Keyboarding (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    In this course, students learn beginning typing and 10-key skills. The objectives are for students to learn how to type by touch and how to take a timed keyboarding test for accuracy and speed.
    PM 112 - Machine Tool Practices I (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    BTA 143 - Economics (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...This course is designed to help students understand the basics of economics such as demand, supply, opportunity cost, and key economic indicators. Students will develop an understanding of how economics affects their everyday lives, how to analyze economic data, and how to use economics to make busi...
    a section of the Economics course in BUSINESS TECH. & ACCOUNTING - BTA
    AET 143 - Hydraulic Systems II (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rres Email Email More info More Info
    matt Bishop Email Email More info More Info
    Jerry Nelson Email Email More info More Info
    ...During this course, students are taught how to apply diagnostic steps to pinpoint hydraulic system failures. Students are taught how to check for pressure and flow on live applications to aid in diagnosing hydraulic control systems. Students will also be introduced to hydrostatic transmission system...
    ET 233 L - Lab & Shop Projects (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will practice applied wiring techniques in various hands-on exercises and labs including, but not limited to: conduit bending, switch connections, non-metallic and metallic cable, wire pulling, panel, box, and device installation, and connections.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    RE 131 L - Lab & Shop Projects (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Mitchell Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This practical laboratory course focuses on applying control strategies to wire and operate HVAC equipment. Students develop a wide range of wiring diagrams, using actual HVAC units. They gain hands-on experience with heat pumps, oil, gas, and electric forced air HVAC systems. Typical lab projects i...
    MOA 515 - Intermediate Diagnostic Coding (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    trey Email Email More info More Info
    Lashel Church Email Email More info More Info
    Danette L. Muntz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Intermediate Diagnostic Coding
    EL 114 L - Lab & Shop Projects (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Introduction to proper drawings and schematics utilizing conductors, cables, switches, receptacles and lighting fixtures. Safe and practical application of classroom instruction on actual equipment. Proper use of personal protective equipment and tools to install and troubleshoot conductors, cab...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    IN 143 L - Lab & Shop Projects (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    MA 113 - Machine Tool Practices I (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Covers the use of hand tools including hacksaws, files, taps, and dies. Topics also include the use of measuring instruments such as steel rules, vernier scales, micrometers, and dial indicators. Precision layout techniques, drilling machine operation, drill bit sharpening, and tapping are also ...
    ET 111 - NEC/WAC/RCW (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    James H. Gabbard Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    PM 113 L - Machine Lab (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...Classroom theory on the operation of drill presses, band saws, bench grinders, and hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping. Classroom theory on the operation and s...
    ET 143 L - Lab & Shop Projects (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will develop, use, and create programs. Students will also use logical diagrams to control the desired process by analyzing inputs and updating outputs by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 121 - Elementary Blueprint Reading II (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Further develops the skills learned in Elementary Blueprint Reading I. Topics covered include the dimensions and symbols used to call out common features such as counter bores, countersinks, fillets, and spot faces. Other topics include tapers, chamfers, bevels, and screw threads.
    BTA 110 - Computer Applications (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course introduces the basics of computer usage and provides training for Microsoft Outlook, OneDrive, and Publisher, along with Adobe Acrobat Reader. The objective is to allow students to be more comfortable working with personal computers daily. Completion of the PTI 101 Workshop is encouraged...
    What

    Click on a content type above to refine your results.