Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • EL 112 - National Electric Code/WAC Code (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Minimum standards for safe installation and maintenance of electrical systems utilizing the L&I adopted edition of National Fire Protection Association (NFPA Volume 70) WAC 296 46B Rules and Regulations that supersede the NEC minimum standards that are enforced and practiced in the industry, and...
    RE 600 - Commercial Refrigeration II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Commercial Refrigeration II
    PM 113 L - Machine Lab (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    ...Classroom theory on the operation of drill presses, band saws, bench grinders, and hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping. Classroom theory on the operation and s...
    AU 111 - Automotive Engine Repair (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    EL 204 - NEC Review and Testing (2013-2014 SUMMER TRIMESTER)
    Code evaluation, reviewing the code covered in the E1 section of the program.
    IN 143 L - Lab & Shop Projects (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    PM 141 - CNC Machine Tool Operation II (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    IN 240 - Analytical Instruments (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    IT 123 - Wireless Technology Lab (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to practical electronic circuits in a lab environment. Students will use components to construct RF modulators, antenna systems, radio/RF receivers and transmitters. Wire-less/RF test equipment (audio generator, spectrum ana...
    IT 131 - Computer Hardware Fundamentals Lab (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to computer hardware in a lab environment. Students will install, configure, and troubleshoot multiple types of computer hardware and devices (cases, power supplies, mainboards, memory, peripheral cards, processors) to verif...
    IN 121 - Electrical Fundamentals II (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    MD 123 - Clinical Procedures II (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    tz Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    Adilene Esperanza Huerta Email Email More info More Info
    ...In this course techniques are taught to enable students to perform the laboratory procedures conducted in physicians’ offices. Information regarding laboratory measurements, use of laboratory equipment, collection and processing of specimens, microbiology, phlebotomy, and blood testing is presented....
    a section of the Clinical Procedures II course in Medical Assistant - MD
    PM 140 - GD&T II (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    A continuation of Geometric Dimensioning & Tolerancing I, this course further develops the geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics covered include form tolerances, orientation tolerances, profile, run out, and location tolerances.
    a section of the GD&T II course in Precision Machining & Manufact - PM
    BTA 122 - Business Presentation (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course provides instruction in delivering business presentations and developing presentation materials. Students will create a variety of charts, graphs, and interactive presentations with the primary use of PowerPoint. Students will be encouraged to complete the MOS certification in PowerPoint...
    ITC 501 L - Cisco Laboratory Instruction I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    gana Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Cisco Laboratory Instruction I
    AET 142 E - Externship (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nick M. Romero Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    BTA 131 - Office Administration (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course is designed to prepare students to manage an office and provides office-related situations including decision-making and critical thinking activities.
    IN 142 - Instrumentation II (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    IN 210 - Calculus II (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are taught formulas for calculating derivatives, applications of derivatives, anti-differentiation, trigonometric functions, and definite integral calculus.
    MD 121 - HIPAA, Laws & Ethics (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    nza Huerta Email Email More info More Info
    This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business.
    a section of the HIPAA, Laws & Ethics course in Medical Assistant - MD
    ET 234 L - Construction II (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    ...Students will take part in on-the-job training projects doing handson electrical wiring installations in residential and commercial buildings. Students are required to have 100% supervision by a (01) journey level electrician employed by Perry Technical Institute while performing these electrical in...
    a section of the Construction II course in Electrical Technology - ET
    IN 504 L - Lab & Shop Projects (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    Lab & Shop Projects
    ET 211 - NEC/WAC/RCW (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...This course will cover how to calculate the ampacity of service, feeder and branch circuit conductors, and the ampacity rating of the panels they supply. Students will also revisit the Washington Administrative Code (WAC) and Revised Code of Washington (RCW) requirements for the electrical industry ...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    RE 111 L - Lab & Shop Projects (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Craig Roy Heckart Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course bridges theory and practice through hands-on laboratory work. Students develop skills in using electrical and HVAC/R tools and equipment commonly found in the industry. They apply basic electrical theory on trainer boards while improving proficiency. The course introduces techniques for ...
    BTA 121 - Keyboarding II (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    In this course, students learn how to improve their accuracy and typing/10-key speed. Students also learn formatting for personal and business letters, memoranda, simple tabulation techniques, proofreading, and editing.
    PM 144 E - Machine Externship (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    IN 140 - Physics II (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    ITC 212 - Cisco Networking II (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    ...This course describes the architecture, components, and operations of routers and switches in a small network. Students learn how to configure a router and a switch for basic functionality. By the end of this course, students will be able to configure and troubleshoot routers and switches and re...
    MED 143 - Clinical Procedures I (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    berg Email Email More info More Info
    Lashel Church Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...Demonstrations are provided on assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measure or vital signs, auditory and visual testing, exam room preparation, equipment set-up, and proper positioning and draping of patients. Patient c...
    a section of the Clinical Procedures I course in Medical Assistant - MED
    PM 132 - Mastercam Mill Level One I (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    IN 143 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    ET 140 - Safety (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Students will explore safety in an industrial setting such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the correct way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 143 L - Lab & Shop Projects (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    ET 133 L - Lab & Shop Projects (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Using ladder diagrams designed in class, students install the wiring to motor control lab stations for various applications and processes. After completion of the lab, the instructor will bug the station and students will apply troubleshooting skills learned in the classroom to locate and repair the...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 144 E - Machine Externship (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    MOA 131 - Health Care Law & Ethics (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    ...This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides guest speakers with real-world experiences. Great emphasis is placed on HIPAA and Washington State priv...
    RE 141 L - Lab & Shop Projects (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...This course helps students apply the knowledge learned in the classroom to operational HVAC equipment. All laboratory/shop tasks will be performed on heating systems that include fossil fuel units such as natural, LP gas units, oil heating systems, electric heating, and heat pump systems. The scope ...
    IN 213 L - Lab & Shop Projects (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    AU 110 - Intro to Automotive Technology (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    MED 142 - Pharmacology I (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-4:15 PM @ *
    Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    ...Provides a basic knowledge of pharmacology, including the legal and ethical issues; terms and abbreviations; involvement of governmental agencies; role of providers and allied health professionals; and reading, interpreting and documenting medication orders. This class includes the administration of...
    a section of the Pharmacology I course in Medical Assistant - MED
    AET 110 - Intro to Agricultural Equipment (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl58ff6019-0d0d-493a-80e1-753a10f3f293@)">Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Zach Givins Lawhorn Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    MOA 212 - Health Care Delivery Systems (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...Students will demonstrate an understanding of health care delivery systems. They are to analyze the organization of health care delivery in hospitals, mental health and ambulatory care centers, home health agencies, and nursing homes. Students will be introduced to the UBO4. Emphasis is placed on ho...
    IN 122 L - Lab & Shop Projects (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    BTA 124 - Business Etiquette (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    This course covers the basics of etiquette relevant to business and professional relationships inside and outside the office.
    EL 406 - Utility Regulations & WAC Code RuleCode Rules (2014-2015 SPRING TRIMESTER)
    Mon, Tue, Wed, Thu: 7-4:00 PM @ *
    href="(@@emailUrl66dfc2d1-7d1a-4906-8436-3f1a536b125d@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Dale E. Eckman Email Email More info More Info
    ...Requirements of our local serving utility, Pacific Power & Light. Topics covered will include but are not limited to, service lateral burial depths, overhead service height requirements, conduit sizing in relation to service ampacities, use of rigid metal conduit, use of PVC conduit, CT installatio...
    IN 602 - Digital Fundamentals (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    alt Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    IN 142 - Instrumentation II (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    IN 221 - Instrumentation IV (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Sanchez-Torres Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    ET 232 - Construction I (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    ...This course will introduce terms, symbols, layout, organization, and structure of plans that are used for residential, commercial, and industrial buildings. Students are taught how to understand and interpret prints for identification of code violations, conflicts of space, and safety issues. Studen...
    a section of the Construction I course in Electrical Technology - ET
    What

    Click on a content type above to refine your results.