Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • AET 132 E - Externship (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    PM 111 - Elementary Blueprint Reading I (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Develops the skills needed to read and interpret industrial drawings. Topics covered include drawing layouts, drawing symbols, and the different drawing views used to describe machined parts.
    IT 231 - Infrastructure & Cabling Stds Lab (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network cabling & infrastructure in a lab environment. Introduction to Power over Ethernet (PoE) cable and device installation will also be covered in accordance with the Washington State Limited Energy System guidelines....
    AET 110 - Intro to Agricultural Equipment (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    PM 132 - Mastercam Mill Level One I (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    IN 802 - Industrial Computing II (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Industrial Computing II expands upon hardware and software configurations and implementation utilizing software packaged for personal computers that provides interfaces between operator and controller. HMI software configurations on PLC-controlled simulators are also explored.
    CST 120 - Construction Concrete (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Mr. Andy Rutrough Email Email More info More Info
    Christopher Corbin Email Email More info More Info
    Students will explore forming methods, footings, foundation walls, slabs, and the handling and curing of concrete. Students will study placing procedures and mix designs.
    a section of the Construction Concrete course in Construction - CST
    AU 121 - Adv Automotive Electrical Systems (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 AM @ *
    ref="(@@emailUrl28b23b81-dbb5-4ead-ba07-c7924a88f8ff@)">Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers electronic theory, wiring diagrams, test equipment, diagnosis, repair and replacement of electronics, lighting, gauges, horn, wiper, accessories, and body modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troub...
    PM 140 - GD&T II (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    A continuation of Geometric Dimensioning & Tolerancing I, this course further develops the geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics covered include form tolerances, orientation tolerances, profile, run out, and location tolerances.
    a section of the GD&T II course in Precision Machining & Manufact - PM
    IN 243 L - Lab & Shop Projects (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    CST 121 - Construction Fundamentals II (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl3ece2965-633b-4601-ad61-c8b5cd8570c5@)">Email Email More info More Info
    Christopher Corbin Email Email More info More Info
    ...This course covers roof framing methods for residential construction. Students will learn about layout, floor and wall framing concepts as well as the framing of stairs. Students will learn about building codes, rafter nomenclature, ceiling joists, and collar ties. Students are given the opportunity...
    BTA 213 - Computerized Accounting Concepts (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course will provide a hands-on approach to learning QuickBooks that incorporates a thorough understanding of the software while applying knowledge of the accounting cycle.
    AET 140 - Professional Development (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    whorn Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    ...This course helps students develop professionally by focusing on soft skills, career planning, and future growth. Students will create professional resumes, cover letters, and technical training portfolios. Students will have industry-specific training on interview skills and participate in mock int...
    BTA 144 - Business Law (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Business Law will focus on legal issues in the workplace and the legal system as it pertains to business transactions. Topics include contract formation and performance, real property, product liability, and employer/employee relations.
    a section of the Business Law course in BUSINESS TECH. & ACCOUNTING - BTA
    ET 123 L - Lab & Shop Projects (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Doug Jenkins Email Email More info More Info
    Students will use electrical components and breadboards to assemble circuits and verify electrical quantities determined in classroom calculations.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    EL 226 L - Lab & Shop Projects (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Camden J. Duncan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...The student will practice applied wiring techniques in various hands-on exercises and labs including, but not limited to: conduit bending, switch connections, single- and three-phase power factor correction, transformer connections, non-metallic cable, metallic cable, wire pulling, panel, box an...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    IN 130 - Operational Amplifiers (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Students are introduced to Operational Amplifiers, Microelectronic Devices, and Arduino Microcontrollers. Students will learn about electronics in relation to control systems and robotics concepts.
    IN 140 - Physics II (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    IPC 100 - Industrial Prep Course (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-11:00 AM @ *
    Email Email More info More Info
    Industrial Prep Course
    PM 123 L - Machine Lab (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    PM 120 - Industrial Mathematics II (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...This course covers the fundamentals of plane geometry. Common shop problems are solved by applying the geometric principles of triangles, common polygons, and circles. Other topics covered include area and volume calculations, trigonometric functions as they apply in the machine trades, calculations...
    IT 121 - Electronics Fundamentals II Lab (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to practical advanced electronic circuits in a lab environment. Students will use advanced electronic components (diodes, transistors, integrated circuits, op-amps) to construct digital circuits and use application/test equi...
    CST 122 - Construction Blueprint Reading II (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    James Santiago Lopez Email Email More info More Info
    This course will introduce reading foundation plans, section views, roof framing plans and plot/site plans. Students will learn about various types of residential and commercial blueprints.
    CST 140 - Interior Finishing (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Students will complete material trim installation and estimate trim quantities and costs. Students will be exposed to base, casing, crown, and wainscot panel molding as well as interior door and window surrounds. Cabinetry installation will also be taught.
    a section of the Interior Finishing course in Construction - CST
    RE 131 L - Lab & Shop Projects (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    bio Email Email More info More Info
    Andrew Freeburg Email Email More info More Info
    ...This practical laboratory course focuses on applying control strategies to wire and operate HVAC equipment. Students develop a wide range of wiring diagrams, using actual HVAC units. They gain hands-on experience with heat pumps, oil, gas, and electric forced air HVAC systems. Typical lab projects i...
    AU 133 - Gasoline and Disel Engine Mgmt Syst (2021 Summer Quarter)
    Mon, Tue, Wed, Thu, Fri: 4:15-10:00 PM @ *
    ell Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers introduction, theory of operation, service, and repair, as well as diagnostic procedures on today’s modern engines. Topics include computerized ignition systems, gasoline fuel injection systems, emission control systems, and on-board diagnostics. This training course also covers d...
    BTA 141 - Entrepreneurship (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course focuses on developing and writing a complete business plan. Students will develop a business idea and learn how to bring their idea to market. Students are taught how companies finance, choose employees, purchase assets, develop and define a market, set a pricing structure, create a mark...
    MOA 131 - Health Care Law & Ethics (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides guest speakers with real-world experiences. Great emphasis is placed on HIPAA and Washington State priv...
    IN 213 L - Lab & Shop Projects (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Damon St Martin Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    MED 212 - Pharmacology II (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Lashel Church Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This is the second of two pharmacology classes. Students will learn the effects of medication and common drugs used with each body system including antineoplastics, analgesics, antipyretics, nutritional supplements, and alternative medicines. STudents will be introduced to WA IIS. Inventory contro...
    a section of the Pharmacology II course in Medical Assistant - MED
    IN 130 - Operational Amplifiers (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Students are introduced to Operational Amplifiers, Microelectronic Devices, and Arduino Microcontrollers. Students will learn about electronics in relation to control systems and robotics concepts.
    AU 120 - Automotive Chassis Systems (2020 Spring Quarter)
    Mon, Tue, Wed, Thu, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    IN 142 - Instrumentation II (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    BTA 124 - Business Etiquette (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    This course covers the basics of etiquette relevant to business and professional relationships inside and outside the office.
    RE 141 L - Lab & Shop Projects (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Jr. Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course helps students apply the knowledge learned in the classroom to operational HVAC equipment. All laboratory/shop tasks will be performed on heating systems that include fossil fuel units such as natural, LP gas units, oil heating systems, electric heating, and heat pump systems. The scope ...
    IT 241 - Low Voltage Systems II Lab (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    ...(continuation of the IT 240 Low Voltage Systems I Lab class) Application of technical knowledge acquired in the classroom is applied to various systems and equipment in a lab environment. Students are provided with hands-on experience and demonstrate comprehension in the installation and programming...
    WLD 131 - Gas Tungsten Arc Welding (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Fri: 4:30-10:00 PM @ *
    Email Email More info More Info
    Mr. Lenard Halderman Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students gain the knowledge to apply the selection of tungsten, polarity, gas, and proper filler rod. They will perform fillet and groove welds with various electrodes and filler materials on mild steel, stainless steel, and aluminum.
    AU 120 - Automotive Chassis Systems (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mr. Ken I. Waggener Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    BTA 210 - Principles of Accounting II (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Students continue to build their accounting skills by learning how to account for partnership equity, corporation stock, corporate dividends, treasury stocks and retained earnings, bonds, the statement of cash flows, financial statement analysis, and cost accounting. The objective of this course is ...
    IN 132 - Instrumentation I (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    AET 142 E - Externship (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    IN 120 - Solid State Devices (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    IN 233 L - Lab & Shop Projects (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    ET 113 L - Lab & Shop Projects (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Starting with drawing of schematics, students will practice safe and practical application of classroom instruction through wiring residential switch and receptacle labs. Students will also demonstrate use of personal protective equipment and tools to install and troubleshoot conductors, switches, r...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 113 L - Machine Lab (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Classroom theory on the operation of drill presses, band saws, bench grinders, and hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping. Classroom theory on the operation and s...
    PM 133 L - Machine Lab (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students will complete a series of projects designed to hone the skills needed in industry. They will machine a series of precision parts on CNC machining and turning centers.
    ITC 111 - Electronics: Fundamentals I (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Basic electronic components and DC circuit operation are introduced including test equipment and tools. DC network analysis, AC circuits, and their effect on reactive components are covered as well. Application of the technical knowledge acquired in the classroom to parctical electronic circuits in ...
    MED 223 E - Externship (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Lilia Ornelas Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Medical Assistant - MED
    ET 221 - Professional Development (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Matthew William Hanshew Email Email More info More Info
    Keith Butler Email Email More info More Info
    Evan Kendall Marney Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    MOA 117 - The Human Body in Health & Disease (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...An introduction to the structure and function of the human body utilizing a system approach. Emphasis placed on the basics of human anatomy as well as the physiology of the skeletal system, muscular system, nervous system, cardiovascular, respiratory, urinary, reproductive, endocrine, digestive, lym...
    What

    Click on a content type above to refine your results.