Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • AU 141 E - Externship (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    ET 121 - NEC (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Kyle Allum Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    IN 240 - Analytical Instruments (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    AET 130 - Electronics & Accessories (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Rundgren Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    This course will build upon the study of electricity by introducing the circuitry, diagnosis, and repair of electronic components. This course also covers theory, diagnosis and repair of in cab climate control systems. Students will also be introduced to GPS and telematics.
    ET 110 - Safety (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course will provide an understanding of electricity and how to prevent common electrical/workplace hazards. Students will be introduced to safety requirements for campus, classroom, lab, and shop environments including the use of tools/equipment, and safety procedures. Weekly safety meetings ar...
    a section of the Safety course in Electrical Technology - ET
    ET 132 - Industrial I (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    ...Industrial I introduces the principles of two- and three-wire control for motor control circuits. The course will identify various control components such as relays, mag-starters, timers, and sensors, along with the symbols and ladder diagrams needed to make a successful control installation. Studen...
    a section of the Industrial I course in Electrical Technology - ET
    IN 232 L - Lab & Shop Projects (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Classroom theory is applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    EL 222 - Transformer Connections (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Camden J. Duncan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...ASA, NEMA, and industrial standards for transformer lead identification and polarity requirements. Practical application of single-phase isolation type transformer configurations. Practical application of three-phase configurations for isolation type transformers. Practical application of single...
    IN 232 - Networking Fundamentals (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    The course introduces networks, network components, and real-world networks.
    IT 212 - Cisco Networking I B (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    ...This Cisco Networking course teaches students the skills necessary to support networks and the applications riding on them. The students can follow data along the switches and routers focusing on data security and best practices. Students may be eligible to apply for network operations, application ...
    RE 111 L - Lab & Shop Projects (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course bridges theory and practice through hands-on laboratory work. Students develop skills in using electrical and HVAC/R tools and equipment commonly found in the industry. They apply basic electrical theory on trainer boards while improving proficiency. The course introduces techniques for ...
    MED 124 - Career Planning (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Lashel Church Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    This course is designed to teach students how to write a professional resume package and to learn basic interviewing skills.
    a section of the Career Planning course in Medical Assistant - MED
    IN 120 - Solid State Devices (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Max E. York Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    EL 225 - Safety Meetings (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Jeho J. Gutierrez Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    ET 230 - Safety (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    AU 141 E - Externship (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    MA 140 - Math for Machine Tech IV (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Introduces trigonometric functions and compound angles as they apply in the machine trades. Calculations of angles and sides of right triangles, the Cartesian coordinate system, the laws of sines and cosines, and compound angle calculations are covered.
    IN 233 L - Lab & Shop Projects (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Derek P. Floyd Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    RE 241 L - Lab & Shop Projects (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Richard M. Snider Email Email More info More Info
    ...This course will provide students with the opportunity to evaluate and troubleshoot a wide variety of equipment. Lab time will allow students to apply the skills they have learned. Training equipment, lab projects, computer simulators, and on-site service work will provide the student with hands...
    EL 232 - Safety Meetings (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    pley Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    ET 142 - Industrial II (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    ...This course will build upon the material introduced in Industrial I with the introduction of programmable logic controllers (PLCs). Students are taught the parts of a PLC and how to set up communication with the computer along with constructing programs in the PLC software. Students will also examin...
    a section of the Industrial II course in Electrical Technology - ET
    PM 142 - Mastercam Mill Level One II (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students use Mastercam to create two- and three- dimensional geometry and tool paths. Topics include tool path selection, proper use of stock setup, tool libraries, and tool path verification.
    AET 113 E - Externship (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    WLD 131 - Gas Tungsten Arc Welding (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Brody Sorenson Email Email More info More Info
    Students gain the knowledge to apply the selection of tungsten, polarity, gas, and proper filler rod. They will perform fillet and groove welds with various electrodes and filler materials on mild steel, stainless steel, and aluminum.
    CST 131 - Construction Fundamentals III (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...In this course, students will continue learning construction techniques and specifically focus on precision cutting where they learn how to be more precise as here is where the installation of products are visible. In addition, students will learn about developing a building envelope. Students will ...
    PM 112 - Machine Tool Practices I (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    IN 142 - Instrumentation II (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    MED 212 - Pharmacology II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Lashel Church Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...This is the second of two pharmacology classes. Students will learn the effects of medication and common drugs used with each body system including antineoplastics, analgesics, antipyretics, nutritional supplements, and alternative medicines. STudents will be introduced to WA IIS. Inventory contro...
    a section of the Pharmacology II course in Medical Assistant - MED
    WLD 141 - Intro to Pipe Welding (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    on Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Intro to Pipe Welding
    a section of the Intro to Pipe Welding course in Welding Technology - WLD
    RE 231 L - Lab & Shop Projects (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    Richard M. Snider Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course allows students to receive hands-on experience operating, servicing, and repairing industrial heating and cooling systems. It allows students to apply the knowledge and skills they have learned in a practical setting to functioning labs and equipment. The related projects in the course w...
    ET 112 - Electrical Theory I (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    RE 120 - Refrigeration & Electric Forced Air (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...In this course, students explore central forced air electric heating systems and their applications. They employ Ohm's Law theory to calculate CFM by temperature rise in electric heat systems. The curriculum assists with students' understanding of mechanical compression refrigeration systems. Electr...
    MED 132 - Medical Terminology (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    This course is designed to reach students to accurately spell, pronounce, and define common medical terms related to major disease processes, diagnostic procedures, labroratory tests, abbreviations (including legal), drugs, and treament modalities.
    a section of the Medical Terminology course in Medical Assistant - MED
    RE 140 - Resident & Light Commerical HVAC II (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Ignacio Lopez, Jr. Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    ...In this section, students delve into heating systems, including fossil fuel units such as natural gas, LP gas, oil heating systems, electric heating, and heat pump systems. The course covers the combustion and venting process in relation to fossil fuel heating systems and introduces duct design prin...
    IN 121 - Electrical Fundamentals II (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    tchinson Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    IN 122 L - Lab & Shop Projects (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    IN 232 - Networking Fundamentals (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    The course introduces networks, network components, and real-world networks.
    RE 110 - Refrigeration Fundamentals (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    ...In this comprehensive course, students delve into the core principles of HVAC. They gain an understanding of heat transfer mechanisms, thermodynamics laws, gas laws, BTUs, pressure, and refrigerants. Mathematical concepts are applied to practical electrical theory and the operation of series and par...
    ET 213 L - Lab & Shop Projects (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    esney Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 123 L - Machine Lab (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    ITC 404 L - Laboratory Instruction (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    trey Email Email More info More Info
    Mike Smith Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Laboratory Instruction
    RE 500 - Commercial Refrigeration I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Commercial Refrigeration I
    CST 141 - Professional Development (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Spencer Curtis Email Email More info More Info
    ...This course helps students develop professionally by focusing on soft skills, career planning, and future growth. Students are taught communication skills for the construction industry. Topics will include verbal communication with co-workers and written communication such as filling out a timecard ...
    a section of the Professional Development course in Construction - CST
    BTA 135 - Human Relations (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tori Bower Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Topics including job satisfaction, motivation, learning and decision making, and personality and cultural values will be covered as they relate to job performance and organizational commitment, all with a focus on scientific evidence.
    IN 244 E - Externship (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    MED 111 - Business English (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    A concentrated review of sentence writing, this course emphasizes sentence combining, basic mechanics, and paragraph writing.
    a section of the Business English course in Medical Assistant - MED
    MED 127 - Office Administration (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    This course is designed to teach students reception duties, the operation of office equipment, collections, financial management, and basic math skills as they relate to medical assistant duties.
    a section of the Office Administration course in Medical Assistant - MED
    IN 110 - Math for Electronics (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    IN 121 - Electrical Fundamentals II (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    What

    Click on a content type above to refine your results.