Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • EL 140 - Introduction to Digital (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Examination of several different numbering systems, including but not limited to logic gates, numbering systems, conversions and combination logic.
    IN 222 L - Lab & Shop Projects (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Classroom theory is applied to practical lab assignments utilizing variable frequency drives (VFD’s), 3-phase induction motors, hydraulic and pneumatic systems and components, control valves and positioners, control panels and panel equipment. Physical construction and installation of labs include a...
    IT 120 - Electronics Fundamental II (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Advanced DC and AC electronics, transistors, solid state, and integrated circuit operational amplifiers are introduced. Boolean algebra and binary arithmetic provide the basis for the understanding of digital logic circuits utilizing logic gates and combinational logic. Practical power supplies, dio...
    BTA 131 - Office Administration (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Emily Escamilla Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tori Bower Email Email More info More Info
    This course is designed to prepare students to manage an office and provides office-related situations including decision-making and critical thinking activities.
    IN 242 - Employment Preparation (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    PM 133 L - Machine Lab (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students will complete a series of projects designed to hone the skills needed in industry. They will machine a series of precision parts on CNC machining and turning centers.
    AET 143 - Hydraulic Systems II (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rres Email Email More info More Info
    matt Bishop Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Jerry Nelson Email Email More info More Info
    ...During this course, students are taught how to apply diagnostic steps to pinpoint hydraulic system failures. Students are taught how to check for pressure and flow on live applications to aid in diagnosing hydraulic control systems. Students will also be introduced to hydrostatic transmission system...
    WLD 122 - Shielded Metal Arc & Pipe Welding (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Riley Morris Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    Students receive instruction regarding the process and theory of shielded metal arc welding. Students will be exposed to the related equipment, setup procedures, and safety requirements. During this course students will also be introduced to the fundamentals and practices of pipe welding.
    IN 232 - Networking Fundamentals (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Derek P. Floyd Email Email More info More Info
    The course introduces networks, network components, and real-world networks.
    MA 301 - Mathematics for Machine Tech. III (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Driver driven formulas for grears, basic geometry, Pythagorean theorem, projection formulas.
    AET 122 - Electrical Systems II (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl58ff6019-0d0d-493a-80e1-753a10f3f293@)">Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Everardo M. Torres Email Email More info More Info
    ...This course covers electronic theory, wiring diagrams, test equipment, diagnosis, repair and replacement of electronics, lighting, gauges, and control modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troubleshooting. Upon comple...
    AU 120 - Automotive Chassis Systems (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    IN 140 - Physics II (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    IN 112 L - Lab & Shop Projects (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    BTA 132 - Introduction to Business (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Students are taught how to apply the basic concepts of business. Topics include the business environment, business formation, financing a business, management motivation and leadership, and operations management.
    IN 133 L - Lab & Shop Projects (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    WLD 130 - Flux Cored Arc Welding (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Justin K. Dillon Email Email More info More Info
    Riley Morris Email Email More info More Info
    ...In this course, students should gain an understanding of the flux cored arc welding process and related variables. Students will demonstrate the ability to make various fillet and groove welds as well as define the operational differences between the two main types of flux cored electrodes. During t...
    IN 140 - Physics II (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    BTA 224 - Introduction to Data Analytics (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course helps students review MOS, analyze data to conclude findings and make decisions and recommendations, and move from raw data to business insights. The students will be introduced to PowerBI and Tableau software programs.
    EL 231 - Career Planning (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process.
    a section of the Career Planning course in Electrical Technology - EL
    ET 112 - Electrical Theory I (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    IN 143 L - Lab & Shop Projects (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    IN 143 L - Lab & Shop Projects (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    IN 112 L - Lab & Shop Projects (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    ET 223 L - Lab & Shop Projects (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Students will have the opportunity to practice wiring transformers and generating electricity with photovoltaic systems. Students will also utilize thermal imaging technology to diagnose potential issues and develop plans for remedy and repair.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    ITC 240 - Voice Communication Systems II (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...A continuation of Quarter 7 Voice Communication Systems. The convergence of voice and data, through the development of Computer-telephone Integration (CTI) and Voice over Internet (VoIP) concepts. Installation, programming and troubleshooting of PBX and VoIP equipment in a simulated business en...
    CST 140 - Interior Finishing (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Spencer Curtis Email Email More info More Info
    Students will complete material trim installation and estimate trim quantities and costs. Students will be exposed to base, casing, crown, and wainscot panel molding as well as interior door and window surrounds. Cabinetry installation will also be taught.
    a section of the Interior Finishing course in Construction - CST
    PM 112 - Machine Tool Practices I (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    EL 213 - Variable-Frequency Drives (2014-2015 FALL QUARTER)
    usi Email Email More info More Info
    Dustin Earl James Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Fundamentals and functions of both DC motor drives and AC variable-frequency drives.
    ET 131 - NEC (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Charles Espinoza Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    This course will cover NEC requirements for motor circuits. Students will determine sizes of conductors, overloads, overcurrent protection and disconnecting means for motor circuits. Previously covered NEC will be added to these calculations such as proper grounding and bonding.
    a section of the NEC course in Electrical Technology - ET
    EL 233 L - Lab & Shop Projects (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    pley Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Lab time will give students the opportunity to apply the use of training equipment including oscilloscopes, signal generators and DC power supplies, used with solid state components to determine how and why they operate. Introducing green technology with solar energy sources and storing and con...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    AET 120 - Engine Theory & Repair (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Michael John Roy Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Students will be introduced to gas, CNG (comperssed natural gas), and diesel engine application, design, construction, theory, and operating principles. This course will also emphasize diagnosis, disassembly, and assembly of engines.
    IN 122 L - Lab & Shop Projects (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    EL 123 - Safety Meetings (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    AET 130 - Electronics & Accessories (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course will build upon the study of electricity by introducing the circuitry, diagnosis, and repair of electronic components. This course also covers theory, diagnosis and repair of in cab climate control systems. Students will also be introduced to GPS and telematics.
    RE 241 L - Lab & Shop Projects (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    tchie Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Richard M. Snider Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course will provide students with the opportunity to evaluate and troubleshoot a wide variety of equipment. Lab time will allow students to apply the skills they have learned. Training equipment, lab projects, computer simulators, and on-site service work will provide the student with hands...
    IT 110 - Electronics Fundamental I (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Basic electronic components and DC circuit operation are introduced including test equipment and tools. DC network analysis, AC circuits, and their effect on reactive components are covered as well. The concepts of teamwork, analytical problem solving, and troubleshooting are introduced. The student...
    IN 304 L - Lab & Shop Projects (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lab & Shop Projects
    MOA 126 - Intro to CPT & ICD-10 Coding (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    This course is an introduction to basic coding concepts. Focus is placed on using official coding guidelines correctly and the course includes extensive practice coding exercises.
    PL 132 E - Externship (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    Email Email More info More Info
    Lee Crane Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required.
    a section of the Externship course in Plumbing Technician - PL
    MOA 114 - Spreadsheets (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ling Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lashel Church Email Email More info More Info
    Students learn Microsoft Excel and how to build business and financial applications for forecasting, budgeting, and basic bookkeeping. The objective of this course is to prepare students to take the MOS certification exam for Excel.
    MED 132 - Medical Terminology (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Lashel Church Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    This course is designed to reach students to accurately spell, pronounce, and define common medical terms related to major disease processes, diagnostic procedures, labroratory tests, abbreviations (including legal), drugs, and treament modalities.
    a section of the Medical Terminology course in Medical Assistant - MED
    IN 212 - Motor Control (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    PM 132 - Mastercam Mill Level One I (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    IPC 101 - Industrial Prep Course (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 12-4:00 PM @ *
    Email Email More info More Info
    Industrial Prep Course
    IN 132 - Instrumentation I (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    IN 122 L - Lab & Shop Projects (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    ET 230 - Safety (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 243 L - Lab & Shop Projects (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    MED 221 - Clinical Procedures III (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...This course provides a review of the material covered in Clinical Procedures I and II. Students will demonstrate competency in each of the areas taught during the previous courses, as well as cover additional material related to specialty procedures. This course will also cover externship preparatio...
    What

    Click on a content type above to refine your results.