Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • ET 234 L - Construction II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Students will take part in on-the-job training projects doing handson electrical wiring installations in residential and commercial buildings. Students are required to have 100% supervision by a (01) journey level electrician employed by Perry Technical Institute while performing these electrical in...
    a section of the Construction II course in Electrical Technology - ET
    ET 221 - Professional Development (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    PM 112 - Machine Tool Practices I (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    MA 242 - Mastercam Mill Level Three II (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    This course covers machining three-dimensional shapes with the surface rough and surface finish toolpaths. Other topics include surface high speed toolpaths and using a STL stock model to verify a solid model.
    ITC 120 - Electronics: Fundamentals II (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl1b3e17c3-c19a-482f-a796-ba28c1811479@)">Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Advanced DC and AC electronics, transistors, and integrated circuit operational amplifiers. Boolean algebra and binary arithmetic provide the basis for the understanding of digital logic circuits utilizing logic gates and combinational logic. Application of the technical knowledge acquired in the ...
    BTA 221 - Accounting Integration (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This is a project-based course that will provide a hands-on simulation project. The project is designed to incorporate the accounting and QuickBooks knowledge gained in previous courses, through realistic practice.
    IN 130 - Operational Amplifiers (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Students are introduced to Operational Amplifiers, Microelectronic Devices, and Arduino Microcontrollers. Students will learn about electronics in relation to control systems and robotics concepts.
    IPC 101 - Industrial Prep Course (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 12-4:00 PM @ *
    Email Email More info More Info
    Industrial Prep Course
    IN 122 L - Lab & Shop Projects (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    IN 120 - Solid State Devices (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Max E. York Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    ET 132 - Industrial I (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Industrial I introduces the principles of two- and three-wire control for motor control circuits. The course will identify various control components such as relays, mag-starters, timers, and sensors, along with the symbols and ladder diagrams needed to make a successful control installation. Studen...
    a section of the Industrial I course in Electrical Technology - ET
    MOA 131 - Health Care Law & Ethics (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    ...This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides guest speakers with real-world experiences. Great emphasis is placed on HIPAA and Washington State priv...
    PM 141 - CNC Machine Tool Operation II (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    AU 120 - Automotive Chassis Systems (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers principles of operation and diagnosis/repair of manually and electronically controlled suspension and steering systems. Also included are the diagnosis and repair of hydraulic brake, drum brake, disc brake, and anti-lock brake systems. Upon completion, students should be able to s...
    ET 111 - NEC/WAC/RCW (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    IT 220 - Cisco Networking II (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    ...This Cisco Networking Academy course prepares students for jobs as network technicians and helps them develop additional skills required for computer technicians and help desk technicians. It provides a basic overview of routing and remote access, addressing, and security. It also familiarizes stude...
    IN 110 - Math for Electronics (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    AU 141 E - Externship (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    ET 120 - Safety (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Building on their electrical theory, students are taught safety relating to energy and various test equipment. The Electrical Department holds weekly safety meetings that include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    CST 122 - Construction Blueprint Reading II (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rbin Email Email More info More Info
    Mr. Andy Rutrough Email Email More info More Info
    Darin Peters Email Email More info More Info
    This course will introduce reading foundation plans, section views, roof framing plans and plot/site plans. Students will learn about various types of residential and commercial blueprints.
    BTA 143 - Economics (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...This course is designed to help students understand the basics of economics such as demand, supply, opportunity cost, and key economic indicators. Students will develop an understanding of how economics affects their everyday lives, how to analyze economic data, and how to use economics to make busi...
    a section of the Economics course in BUSINESS TECH. & ACCOUNTING - BTA
    EL 211 - NEC & Load Sizing Calculations (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Covering code Articles 220 and 240, calculating the ampacity of service conductors, feeder conductors, branch circuit conductor, and the ampacity rating of the panels and load centers they supply, including the overcurrent devices used for protection.
    MA 502 - CNC Machine Tool Operation I (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Geometery construction, 2-D tool path generation, tool path editing, surface modeling, 3-D tool path generation, NC files, and post clamping methods.
    MOA 131 - Health Care Law & Ethics (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    ...This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides guest speakers with real-world experiences. Great emphasis is placed on HIPAA and Washington State priv...
    AET 131 - Power Train Theory I (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    Jerry Nelson Email Email More info More Info
    In this course, students should develop an understanding of transmissions, clutches, and sliding gears. Students will be exposed to the design, operation, adjustment, and maintenance of powertrain systems.
    AET 130 - Electronics & Accessories (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    This course will build upon the study of electricity by introducing the circuitry, diagnosis, and repair of electronic components. This course also covers theory, diagnosis and repair of in cab climate control systems. Students will also be introduced to GPS and telematics.
    PM 111 - Elementary Blueprint Reading I (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Develops the skills needed to read and interpret industrial drawings. Topics covered include drawing layouts, drawing symbols, and the different drawing views used to describe machined parts.
    RE 130 - Resident & Light Commercial HVAC I (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...In this foundational course, students continue learning the safe handling of refrigerants and proper HVAC system charging, including recovery and applications of refrigerants. The course covers the fundamentals of humidification and air filtration, encompassing various types of air filters, from dis...
    AET 143 - Hydraulic Systems II (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl58ff6019-0d0d-493a-80e1-753a10f3f293@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Everardo M. Torres Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Caleb Micheal Miller Email Email More info More Info
    ...During this course, students are taught how to apply diagnostic steps to pinpoint hydraulic system failures. Students are taught how to check for pressure and flow on live applications to aid in diagnosing hydraulic control systems. Students will also be introduced to hydrostatic transmission system...
    IN 112 L - Lab & Shop Projects (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    IT 131 - Computer Hardware Fundamentals Lab (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to computer hardware in a lab environment. Students will install, configure, and troubleshoot multiple types of computer hardware and devices (cases, power supplies, mainboards, memory, peripheral cards, processors) to verif...
    IN 213 L - Lab & Shop Projects (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    IN 804 L - Lab & Shop Projects (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Classroom theory will be applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    EL 144 L - Lab & Shop Projects (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Students will develop, use, and create programs and use logical diagrams to control the desired process by analyzing inputs and updating outputs and by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    WLD 140 - Fabrication Techniques (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Riley Morris Email Email More info More Info
    Austyn Selberg Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    EL 224 - Conduit Bending & Wiring Practices (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jeho J. Gutierrez Email Email More info More Info
    Introduction to the use of hand, hydraulic, and PVC conduit benders. Lab exercises will include the following: predetermined 90-degree stubs, predetermined offsets, box offsets, back-toback 90-degree stubs, three-bend saddles, four-bend saddles, and kicks.
    ET 130 - Safety (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Students will explore safety in an industrial setting, covering topics such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrica...
    a section of the Safety course in Electrical Technology - ET
    MED 222 - Electronic Health Records (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    ling Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Lashel Church Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will use a simulated EHR to practice hands-on documentation.
    MOA 126 - Intro to CPT & ICD-10 Coding (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    This course is an introduction to basic coding concepts. Focus is placed on using official coding guidelines correctly and the course includes extensive practice coding exercises.
    IN 121 - Electrical Fundamentals II (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    IT 142 - Network Server OS Services (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Continuation of network server operating system implementation. Principles, design, implementation, and administration of the latest industry network architectures and topologies. Virtualized network environments to provide service and applications to end users are covered, as well as network storag...
    LAP 430 E - Externship (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Externship
    a section of the Externship course in LEGAL ASSISTANT/PARALEGAL - LAP
    IN 241 - Industrial Computing II (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Industrial Computing II expands upon hardware and software configurations and implementation utilizing software packaged for personal computers that provides interfaces between operator and controller. HMI software configurations on PLC-controlled simulators are also explored.
    MOA 128 - Electronic Health Care Records (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Overview of commonly available software tools used in health care. Introduction to the electronic health record process and medical office database management software found in American health care delivery.
    WLD 113 - Basic Metallurgy (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-9:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Desmond Weigand Email Email More info More Info
    Students will study and analyze the various changes that take place in metals when they are cut or joined with thermal processes such as welding or thermal cutting. Students will expand upon this knowledge by developing a higher understanding of mechanical property changes.
    a section of the Basic Metallurgy course in Welding Technology - WLD
    AET 110 - Intro to Agricultural Equipment (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrl12dae0be-51a2-4657-855e-ca48a9295120@)">Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    PL 121 - Plumbing Fundamentals II (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    s Email Email More info More Info
    ...Students will be exposed to potable water treatment, tools used on water supply systems, water pressure, hydrostatic pressure, basement water mains, and pressure-reducing valves. Pipe cleaning, hydro jets, and excavation techniques will be explored. Students will also engage in the process of heatin...
    ITC 122 L - PC A+ Laboratory Instruction (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    oit Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mike Smith Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Software and hardware installation is accomplished which allows the student to install, maintain, and troubleshoot computer systems. Workstation configuration using different operating systems as well as virtualization software teaches students the skills necessary to troubleshoot a variety of c...
    ITC 241 - Limited Energy (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Limited Energy Systems: Alarms & Amplified Sound. Fire alarm system installation, programming and troubleshooting are covered. Proper installation practices are covered in accordance with the National Electrical Code and NFPA 72: National Fire Alarm Code. Amplified sound and speaker systems, in...
    a section of the Limited Energy course in Info Tech & Comm Systems - ITC
    IT 240 - Low Voltage Systems II (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    (continuation of the IT 232 Low Voltage Systems I class) Students receive advanced theory and training in additional low voltage and communication systems and peripheral devices. Proper installation practices in accordance with codes and standards are also covered.
    What

    Click on a content type above to refine your results.