Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • ET 141 - NEC (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    This course will examine and review previously covered NEC articles.
    a section of the NEC course in Electrical Technology - ET
    IN 211 - Instrumentation III (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Derek P. Floyd Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    EL 110 - Electrical Safety (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Safety requirements for campus, classroom, lab, and shop environments. Proper use and care of personal and school property, tools, equipment and procedures. Weekly safety meetings for the Electrical Department. The meeting has a safety curriculum that is covered with the students. Safety demons...
    a section of the Electrical Safety course in Electrical Technology - EL
    PM 140 - GD&T II (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    A continuation of Geometric Dimensioning & Tolerancing I, this course further develops the geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics covered include form tolerances, orientation tolerances, profile, run out, and location tolerances.
    a section of the GD&T II course in Precision Machining & Manufact - PM
    RE 231 L - Lab & Shop Projects (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    ...This course allows students to receive hands-on experience operating, servicing, and repairing industrial heating and cooling systems. It allows students to apply the knowledge and skills they have learned in a practical setting to functioning labs and equipment. The related projects in the course w...
    IN 210 - Calculus II (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are taught formulas for calculating derivatives, applications of derivatives, anti-differentiation, trigonometric functions, and definite integral calculus.
    AET 121 - Fuel Systems (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrl12dae0be-51a2-4657-855e-ca48a9295120@)">Email Email More info More Info
    matt Bishop Email Email More info More Info
    Everardo M. Torres Email Email More info More Info
    This course focuses on fuel system theory, design, maintenance, diagnosis, and repair of mechanical and electronic fuel systems used in agriculture and construction equipment.
    a section of the Fuel Systems course in Agricultural Equipment Tech - AET
    MD 121 - HIPAA, Laws & Ethics (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    nza Huerta Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business.
    a section of the HIPAA, Laws & Ethics course in Medical Assistant - MD
    RE 121 L - Lab & Shop Projects (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    ...This hands-on laboratory course develops students' electrical troubleshooting skills, equipment wiring, and gives emphasis to the application of key performance indicators for mechanical compression refrigeration systems. Practicality is emphasized through wiring and operating relays, capacitors, mo...
    WLD 142 E - Externship (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    er Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Welding Technology - WLD
    ET 111 - NEC/WAC/RCW (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    ker Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    ET 133 L - Lab & Shop Projects (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Charles Espinoza Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Using ladder diagrams designed in class, students install the wiring to motor control lab stations for various applications and processes. After completion of the lab, the instructor will bug the station and students will apply troubleshooting skills learned in the classroom to locate and repair the...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    IN 233 L - Lab & Shop Projects (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    PTD 100 C2 - Professional Truck Driving (2023 PTD Spring)
    Mon, Tue, Wed, Thu: 7-3:30 PM @
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Paul R. Woolpert Email Email More info More Info
    Professional Truck Driving
    AU 111 - Automotive Engine Repair (2021 Fall Quarter)
    Mon, Tue, Wed, Thu, Fri: 7:30-4:00 PM @ *
    Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    ET 130 - Safety (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Nicholas Tyler Marney Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Students will explore safety in an industrial setting, covering topics such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrica...
    a section of the Safety course in Electrical Technology - ET
    ITC 806 - Externship (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Qualifying students have the option of obtaining practical experience in a workplace environment in lieu of the last month of training on campus. Externships must relate to the training that would occur in the last quarter of ITCS and must be approved by the Department Head. If the student does ...
    a section of the Externship course in Info Tech & Comm Systems - ITC
    RE 141 L - Lab & Shop Projects (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...This course helps students apply the knowledge learned in the classroom to operational HVAC equipment. All laboratory/shop tasks will be performed on heating systems that include fossil fuel units such as natural, LP gas units, oil heating systems, electric heating, and heat pump systems. The scope ...
    ET 121 - NEC (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Doug Jenkins Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    PM 132 - Mastercam Mill Level One I (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    MED 111 - Business English (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    berg Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lashel Church Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    A concentrated review of sentence writing, this course emphasizes sentence combining, basic mechanics, and paragraph writing.
    a section of the Business English course in Medical Assistant - MED
    IT 143 - Network Server OS Services Lab (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating system services in a lab environment. Students will demonstrate additional advanced services, utilities and administration of various network architectures/topologies in virtualized environments, ...
    IT 140 - Network Server OS Configuration (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...Installation and configuration of a network server operating system is covered. Configuration of virtual machines/networks, DHCP/DNS services, domain controllers, Active Directory, and group/security policies are also introduced. Basic computer/server networking is demonstrated as students learn the...
    BTA 130 - Fundamentals of Accounting (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...In an introduction to accounting, students are taught accounting concepts and procedures to include debits and credits, the general journal, general ledger, accounting cycle, banking and cash handling procedures, and payroll entries. The objective of this course is to give students a foundation in a...
    MA 122 - Machine Tool Practices II (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers the different types of lathes, their nomenclature, and their operation and set-up theories. Topics covered include turning, thread cutting, grooving, drilling, and tapping. The operation of band saws, cold saws, and abrasive saws is also covered. Dimensional measurements will ...
    ET 120 - Safety (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Building on their electrical theory, students are taught safety relating to energy and various test equipment. The Electrical Department holds weekly safety meetings that include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 233 L - Lab & Shop Projects (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    ET 131 - NEC (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    David Richins Email Email More info More Info
    This course will cover NEC requirements for motor circuits. Students will determine sizes of conductors, overloads, overcurrent protection and disconnecting means for motor circuits. Previously covered NEC will be added to these calculations such as proper grounding and bonding.
    a section of the NEC course in Electrical Technology - ET
    IN 231 - Digital Fundamentals (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    WLD 142 E - Externship (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Welding Technology - WLD
    ET 122 - Electrical Theory II (2017 Spring Quarter)
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...This course will examine direct current motors and generators beginning with magnetic fields surrounding conductors and coils. From there, students will move into the generation of alternating current and reactive components such as inductors and capacitors in RLC circuits. Students are taught the c...
    MA 502 - CNC Machine Tool Operation I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Geometery construction, 2-D tool path generation, tool path editing, surface modeling, 3-D tool path generation, NC files, and post clamping methods.
    PM 112 - Machine Tool Practices I (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    IN 231 - Digital Fundamentals (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    WLD 140 - Fabrication Techniques (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    ling Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    MED 143 - Clinical Procedures I (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Demonstrations are provided on assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measure or vital signs, auditory and visual testing, exam room preparation, equipment set-up, and proper positioning and draping of patients. Patient c...
    a section of the Clinical Procedures I course in Medical Assistant - MED
    AU 112 - Basic Automotive Electrical Systems (2025 Winter Quarter)
    Mon, Tue, Wed, Thu, Fri: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    z Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Riley Morris Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    ET 230 - Safety (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    PM 144 E - Machine Externship (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    PL 132 - Finish and Advanced Plumbing (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    ref="(@@emailUrl6a99d937-3b50-4696-b53d-41aaece3fa87@)">Email Email More info More Info
    Tim M Bushnell Email Email More info More Info
    ...In this course, students will examine the home plumbing system: drain-waste vent, water shut-off, toilets, faucets, drains, dishwashers, food disposers, water heaters, showers/tubs, water softeners, icemakers, water filters, sinks, and gas lines. Students will also be instructed on drainage, back si...
    PM 141 - CNC Machine Tool Operation II (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    ET 133 L - Lab & Shop Projects (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Using ladder diagrams designed in class, students install the wiring to motor control lab stations for various applications and processes. After completion of the lab, the instructor will bug the station and students will apply troubleshooting skills learned in the classroom to locate and repair the...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    IT 110 - Electronics Fundamental I (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Basic electronic components and DC circuit operation are introduced including test equipment and tools. DC network analysis, AC circuits, and their effect on reactive components are covered as well. The concepts of teamwork, analytical problem solving, and troubleshooting are introduced. The student...
    BTA 142 - Business Ethics (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides opportunities for students to learn through discussion.
    EL 123 - Safety Meetings (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    RE 230 - Industr Heating & Cooling Systems I (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Shane L. Tillett Email Email More info More Info
    ...In this advanced course, students are introduced to industrial heating and cooling systems and their various components, including variable air volume (VAV) systems, boilers, chillers, cooling towers, hot water systems, geothermal heat pumps, electrical theory, control circuits, wiring schematics, v...
    ITC 143 - Network Server Operating Systems (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...Installation and configuration of Windows server. Configuration of virtual machines and networks, DHCP and DNS services, domain controllers and active directory along with group policy and security policies. Preparation for the Microsoft Server certification. Technical knowledge acquired in the ...
    RE 121 L - Lab & Shop Projects (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    ...This hands-on laboratory course develops students' electrical troubleshooting skills, equipment wiring, and gives emphasis to the application of key performance indicators for mechanical compression refrigeration systems. Practicality is emphasized through wiring and operating relays, capacitors, mo...
    WLD 140 - Fabrication Techniques (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    IT 212 - Cisco Networking I B (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    gana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This Cisco Networking course teaches students the skills necessary to support networks and the applications riding on them. The students can follow data along the switches and routers focusing on data security and best practices. Students may be eligible to apply for network operations, application ...
    What

    Click on a content type above to refine your results.