Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • ET 140 - Safety (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will explore safety in an industrial setting such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the correct way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 143 L - Lab & Shop Projects (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    ET 113 L - Lab & Shop Projects (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    rd Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Starting with drawing of schematics, students will practice safe and practical application of classroom instruction through wiring residential switch and receptacle labs. Students will also demonstrate use of personal protective equipment and tools to install and troubleshoot conductors, switches, r...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    WLD 131 - Gas Tungsten Arc Welding (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    d Houston Email Email More info More Info
    Branden Lee Calahan Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Students gain the knowledge to apply the selection of tungsten, polarity, gas, and proper filler rod. They will perform fillet and groove welds with various electrodes and filler materials on mild steel, stainless steel, and aluminum.
    ET 210 - Safety (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    ...Students will explore safety in an industrial setting such as meter use, personal protective equipment, and lock- out, tag-out, try-out. The Electrical Department holds weekly safety meetings that include a safety demonstration to show the correct way to use tools, ladders, and other equipment neede...
    a section of the Safety course in Electrical Technology - ET
    IN 132 - Instrumentation I (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    ITC 120 - Electronics: Fundamentals II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    ...Advanced DC and AC electronics, transistors, and integrated circuit operational amplifiers. Boolean algebra and binary arithmetic provide the basis for the understanding of digital logic circuits utilizing logic gates and combinational logic. Application of the technical knowledge acquired in the ...
    IT 120 - Electronics Fundamental II (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Advanced DC and AC electronics, transistors, solid state, and integrated circuit operational amplifiers are introduced. Boolean algebra and binary arithmetic provide the basis for the understanding of digital logic circuits utilizing logic gates and combinational logic. Practical power supplies, dio...
    IT 234 - Human Relations (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    href="(@@emailUrl63f375ee-081a-4849-a55a-be30507a7532@)">Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...Human Relations will assist students in developing the personal and professional skills necessary for business success. Topics include confidence building, self-concept, and self-esteem, building positive attitudes, motivation, and effective leadership. This course is also designed to prepare the st...
    PTD 100 C2 - Professional Truck Driving (2024 PTD Spring)
    Mon, Tue, Wed, Thu: 7-3:30 PM @
    Email Email More info More Info
    Gustavo Saucedo Email Email More info More Info
    Professional Truck Driving
    ET 143 L - Lab & Shop Projects (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Students will develop, use, and create programs. Students will also use logical diagrams to control the desired process by analyzing inputs and updating outputs by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    ET 141 - NEC (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    vely Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    This course will examine and review previously covered NEC articles.
    a section of the NEC course in Electrical Technology - ET
    EL 401 - AC Theory, Three Phase & PowerFactor (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Brock Byers Email Email More info More Info
    RL, RC, RLC Parallel circuits, and power-factor. Three phase vectors, and power factor in wye and delta configurations.
    IT 141 - Network Server OS Configuration Lab (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating systems in a lab environment. Students will install, configure, manage, and troubleshoot multiple types of network server operating systems and virtual networks to verify operation and prove theor...
    BTA 114 - Business English I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course emphasizes basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate a grasp of basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum of errors in sentence str...
    BTA 223 E - Externship (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in BUSINESS TECH. & ACCOUNTING - BTA
    IN 242 - Employment Preparation (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    IT 112 - Math for Technical Applications (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...This course will focus on the basic technical applications of mathematics to include solving and applying algebraic expressions including factoring & graphing, as well as order of operations, exponents, significant numbers, addition/subtraction of positive and negative numbers, fractions, multiplica...
    ITC 602 - Cisco Networking III (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    Cisco Networking III
    EL 225 - Safety Meetings (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    Assessment 2025 - Enrollment Assessments (Assessment Center)
    h McNamara Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    JacLyn Foster Email Email More info More Info
    Zachary Thomas Williams Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Danielle A. Weedin Email Email More info More Info
    Sherry Mickles Email Email More info More Info
    Perry Technical Institute Enrollment Assessments
    IN 211 - Instrumentation III (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    IN 132 - Instrumentation I (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    IN 231 - Digital Fundamentals (2025 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    BTA 131 - Office Administration (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mike Marquis Email Email More info More Info
    This course is designed to prepare students to manage an office and provides office-related situations including decision-making and critical thinking activities.
    AU 133 - Gasoline and Disel Engine Mgmt Syst (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mr. Ken I. Waggener Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers introduction, theory of operation, service, and repair, as well as diagnostic procedures on today’s modern engines. Topics include computerized ignition systems, gasoline fuel injection systems, emission control systems, and on-board diagnostics. This training course also covers d...
    IT 220 - Cisco Networking II (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    ...This Cisco Networking Academy course prepares students for jobs as network technicians and helps them develop additional skills required for computer technicians and help desk technicians. It provides a basic overview of routing and remote access, addressing, and security. It also familiarizes stude...
    ET 133 L - Lab & Shop Projects (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Using ladder diagrams designed in class, students install the wiring to motor control lab stations for various applications and processes. After completion of the lab, the instructor will bug the station and students will apply troubleshooting skills learned in the classroom to locate and repair the...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MOA 144 - Adv. CPT & ICD-10 Coding (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...This course provides students with an understanding of coding scenarios, with an emphasis on medical coding services such as medical visits, diagnostic testing and interpretation, treatments, surgeries, and anesthesia. This course covers advanced coding concepts using step-by-step methods that give ...
    IN 213 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    ET 110 - Safety (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    James H. Gabbard Email Email More info More Info
    ...This course will provide an understanding of electricity and how to prevent common electrical/workplace hazards. Students will be introduced to safety requirements for campus, classroom, lab, and shop environments including the use of tools/equipment, and safety procedures. Weekly safety meetings ar...
    a section of the Safety course in Electrical Technology - ET
    CST 110 - Introduction to Construction (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    ugh Email Email More info More Info
    Darin Peters Email Email More info More Info
    Christopher Corbin Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, systems, and terms of the construction industry. Topics include the building process, materials, building systems, and construction components. Completion of the ...
    WLD 143 - AWS/WABO Certification Prep Course (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    This course prepares students to sit for the American Welding Society (AWS) and Washington Association of Building Officials (WABO) welding certification tests. Students will receive review instruction in the classroom and lab environments pertaining to various welding codes.
    AU 121 - Adv Automotive Electrical Systems (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Rogelio C Lopez Email Email More info More Info
    ...This course covers electronic theory, wiring diagrams, test equipment, diagnosis, repair and replacement of electronics, lighting, gauges, horn, wiper, accessories, and body modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troub...
    IN 110 - Math for Electronics (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    IN 140 - Physics II (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl2caf50f2-9125-4315-99ee-faf7aa99aef3@)">Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    WLD 112 - Introduction to Print Reading (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    y Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    BTA 125 - Business English II (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course is a continuation from Business English I and basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum o...
    IT 242 - Limited Energy (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    ...Limited Energy Systems: Alarms and amplified sound. Fire alarm system installation, programming, and troubleshooting are covered. Proper installation practices are covered in accordance with the National Electrical Code and NFPA 72: National Fire Alarm Code. Amplified sound and speaker systems, incl...
    BTA 123 - Career Planning (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course is designed to teach students how to write a professional cover letter and resume, participate in career networking, search for positions, apply for positions, and negotiate a position in an administrative field.
    IN 121 - Electrical Fundamentals II (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    PM 113 L - Machine Lab (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Classroom theory on the operation of drill presses, band saws, bench grinders, and hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping. Classroom theory on the operation and s...
    RE 120 - Refrigeration & Electric Forced Air (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    ...In this course, students explore central forced air electric heating systems and their applications. They employ Ohm's Law theory to calculate CFM by temperature rise in electric heat systems. The curriculum assists with students' understanding of mechanical compression refrigeration systems. Electr...
    EL 113 - Introduction to Voltage Systems (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Names, schematics, grounding, configurations and hook-ups of single-phase transformers and three-phase transformers used in the industry.
    MA 122 - Machine Tool Practices II (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers the different types of lathes, their nomenclature, and their operation and set-up theories. Topics covered include turning, thread cutting, grooving, drilling, and tapping. The operation of band saws, cold saws, and abrasive saws is also covered. Dimensional measurements will ...
    ET 222 - Electrical Theory III (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    rano Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Matthew William Hanshew Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    BTA 141 - Entrepreneurship (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    ...This course focuses on developing and writing a complete business plan. Students will develop a business idea and learn how to bring their idea to market. Students are taught how companies finance, choose employees, purchase assets, develop and define a market, set a pricing structure, create a mark...
    IN 110 - Math for Electronics (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...This course covers numbers, addition, subtraction, multiplication, and division of polynomials, equations, powers of 10, units and dimensions, special products and factoring, algebraic fractions, fractional equations, graphs, simultaneous equations, exponents and radicals, and quadratic equations. C...
    RE 243 E - Externship (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Andrew Freeburg Email Email More info More Info
    ...Students can accept a position as a HVAC/R technician and work in industry under a training externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required as well as some assigned course activities. To be eligible for an externship...
    a section of the Externship course in Refrigeration Technology - RE
    What

    Click on a content type above to refine your results.