Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • CST 131 - Construction Fundamentals III (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rbin Email Email More info More Info
    Rob Blazina Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...In this course, students will continue learning construction techniques and specifically focus on precision cutting where they learn how to be more precise as here is where the installation of products are visible. In addition, students will learn about developing a building envelope. Students will ...
    AU 110 - Intro to Automotive Technology (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    AU 112 - Basic Automotive Electrical Systems (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    AU 141 E - Externship (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    BTA 122 - Business Presentation (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course provides instruction in delivering business presentations and developing presentation materials. Students will create a variety of charts, graphs, and interactive presentations with the primary use of PowerPoint. Students will be encouraged to complete the MOS certification in PowerPoint...
    ET 130 - Safety (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Students will explore safety in an industrial setting, covering topics such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrica...
    a section of the Safety course in Electrical Technology - ET
    MED 515 - Clinical Procedures II (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Clinical Procedures II
    a section of the Clinical Procedures II course in Medical Assistant - MED
    ITC 222 - Cisco Networking III (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course describes the architecture, components, and operations of routers and switches in larger and more complex networks. Students learn how to configure routers and switches for advanced functionality. By the end of this course, students will be able to configure and troubleshoot routers ...
    CST 122 - Construction Blueprint Reading II (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Mr. Andy Rutrough Email Email More info More Info
    This course will introduce reading foundation plans, section views, roof framing plans and plot/site plans. Students will learn about various types of residential and commercial blueprints.
    PM 130 - GD&T I (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...This course covers the fundamental geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics include basic dimensioning and tolerancing rules, definitions, symbols, form variation, and basic fits of mating parts. Other topics include datums, material conditions, a...
    a section of the GD&T I course in Precision Machining & Manufact - PM
    EL 505 - Safety Meetings (2014-2015 SPRING TRIMESTER)
    Mon, Tue, Wed, Thu: 7-4:00 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Safety Meetings
    a section of the Safety Meetings course in Electrical Technology - EL
    ET 140 - Safety (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Students will explore safety in an industrial setting such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the correct way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 241 - Industrial Computing II (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Industrial Computing II expands upon hardware and software configurations and implementation utilizing software packaged for personal computers that provides interfaces between operator and controller. HMI software configurations on PLC-controlled simulators are also explored.
    IN 210 - Calculus II (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Derek P. Floyd Email Email More info More Info
    Students are taught formulas for calculating derivatives, applications of derivatives, anti-differentiation, trigonometric functions, and definite integral calculus.
    IT 230 - Infrastructure & Cabling Standards (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Equips the student to pursue careers in the network infrastructure industry. Cabling applications, installation and testing are covered. The history of the industry and industry terms are presented. National Electrical Code and industry cabling and equipment standards are covered.
    PTD 110 - Classroom Instruction (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course introduces the trucking industry, acquisition of the commercial driver’s license (CDL), types of endorsements, driver qualifications, driver disqualifications, interstate vs. intrastate, and regulation of the trucking industry. Topics include life on the road, customer relationships, med...
    BTA 113 - Spreadsheets (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...Students learn how to use Microsoft Excel for basic and more advanced spreadsheet creation including tables, charts, PivotTables, and PivotCharts. Students will practice creating formulas using absolute and relative cell references and using functions like COUNTIF and VLOOKUP to answer questions and...
    a section of the Spreadsheets course in BUSINESS TECH. & ACCOUNTING - BTA
    ET 211 - NEC/WAC/RCW (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    ...This course will cover how to calculate the ampacity of service, feeder and branch circuit conductors, and the ampacity rating of the panels they supply. Students will also revisit the Washington Administrative Code (WAC) and Revised Code of Washington (RCW) requirements for the electrical industry ...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    ITC 121 - Wireless Technology (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Radio frequency theory, noise bandwidth, analog and digital modulators. RF transmission and reception, propagation, transmission lines, and antenna systems are covered. Lab projects enable the application of the technical knowledge acquired in the clasroom to RF modulators, radio receivers, antenn...
    AU 112 - Basic Automotive Electrical Systems (2026 Winter Quarter)
    Mon, Tue, Wed, Thu, Fri: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Rogelio C Lopez Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    MED 143 - Clinical Procedures I (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Demonstrations are provided on assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measure or vital signs, auditory and visual testing, exam room preparation, equipment set-up, and proper positioning and draping of patients. Patient c...
    a section of the Clinical Procedures I course in Medical Assistant - MED
    ITC 110 - Applied Math for Electronics I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    oit Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mathematics required to evaluate and understand the electronic circuits and equipment which will be covered.
    IN 232 L - Lab & Shop Projects (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Classroom theory is applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    PM 110 - Industrial Mathematics I (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...Operations with fractions, mixed numbers, and decimals as they relate to the machine trades. The topics covered are the basic math skills of addition, subtraction, multiplication, and division. Calculations involving exponents are also covered as well as the fundamentals of algebra found in the mach...
    RE 210 - Commercial Refrigeration I (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    z Email Email More info More Info
    Andrew Freeburg Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...In this course, students begin with the fundamentals of commercial refrigeration. They explore both medium-temperature and low-temperature applications, identifying refrigeration flow problems and delving into the mechanical components of commercial refrigeration systems. Electrically, students stud...
    IN 130 - Operational Amplifiers (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Students are introduced to Operational Amplifiers, Microelectronic Devices, and Arduino Microcontrollers. Students will learn about electronics in relation to control systems and robotics concepts.
    BTA 212 - Human Resources (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course will introduce students to aspects of human resource management. Students are taught current practices in human resource planning. Topics will include addressing legal requirements, employee motivation and training, hiring, and assessing performance.
    MED 213 - Clinical Procedures II (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    ...Techniques are taught to enable students to perform the routine laboratory procedures conducted in physicians’ offices. Information regarding laboratory mathematics and measurement, use of laboratory equipment, collection and processing of specimens, microbiology, phlebotomy, and routine blood ...
    a section of the Clinical Procedures II course in Medical Assistant - MED
    MED 142 - Pharmacology I (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-4:15 PM @ *
    berg Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...Provides a basic knowledge of pharmacology, including the legal and ethical issues; terms and abbreviations; involvement of governmental agencies; role of providers and allied health professionals; and reading, interpreting and documenting medication orders. This class includes the administration of...
    a section of the Pharmacology I course in Medical Assistant - MED
    EL 240 E - Externship (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    ...On-the-job training projects doing hands-on electrical wiring installations in residential and commercial buildings. All trainee electrical installations are supervised by a journeyman electrician and inspected by the Department of Labor & Industries. Completion of an externship packet is requir...
    a section of the Externship course in Electrical Technology - EL
    IN 133 L - Lab & Shop Projects (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    ET 233 L - Lab & Shop Projects (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Students will practice applied wiring techniques in various hands-on exercises and labs including, but not limited to: conduit bending, switch connections, non-metallic and metallic cable, wire pulling, panel, box, and device installation, and connections.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    IN 112 L - Lab & Shop Projects (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    John D. Koenes Email Email More info More Info
    ...School rules, conduct and dress code, including proper clothing requirements and the use of safety glasses, general safety practices concerning the usage and maintenance procedures for electrical and general shop equipment. First aid and CPR training for two-year certification, tool and book purchas...
    ET 213 L - Lab & Shop Projects (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    esney Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    EL 142 - NEC Review (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Code evaluation of previously covered code articles.
    a section of the NEC Review course in Electrical Technology - EL
    ET 142 - Industrial II (2026 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Austin Alec Hively Email Email More info More Info
    ...This course will build upon the material introduced in Industrial I with the introduction of programmable logic controllers (PLCs). Students are taught the parts of a PLC and how to set up communication with the computer along with constructing programs in the PLC software. Students will also examin...
    a section of the Industrial II course in Electrical Technology - ET
    BTA 132 - Introduction to Business (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Students are taught how to apply the basic concepts of business. Topics include the business environment, business formation, financing a business, management motivation and leadership, and operations management.
    ET 240 E - Externship (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    Mr. Michael Haggerty Email Email More info More Info
    ...Students will complete on-the-job training projects doing hands- on electrical wiring installations in residential and commercial buildings. While working for the school, all trainee electrical installations are supervised by a (01) journey level electrician and the work is inspected by the Departme...
    a section of the Externship course in Electrical Technology - ET
    AU 140 - Automotive Drivetrain Systems (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    ...This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drivetrains and the use of appropriate service tools and equipment. This course will also cover manual...
    WLD 140 - Fabrication Techniques (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    er Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    MOA 220 - Advanced Coding (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course provides students with advanced understanding of complex coding scenarios, with an emphasis on medical coding services such as medical visits, diagnostic testing and interpretation, treatments, surgeries, and anesthesia. This course covers more advanced coding concepts using stepby- ...
    MOA 132 - Medical Terminology (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    This course is designed to teach students to accurately spell, pronounce, and define common medical terms related to major disease processes, diagnostic procedures, laboratory tests, abbreviations, drugs, and treatment modalities.
    BTA 130 - Fundamentals of Accounting (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Tori Bower Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...In an introduction to accounting, students are taught accounting concepts and procedures to include debits and credits, the general journal, general ledger, accounting cycle, banking and cash handling procedures, and payroll entries. The objective of this course is to give students a foundation in a...
    IN 210 - Calculus II (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are taught formulas for calculating derivatives, applications of derivatives, anti-differentiation, trigonometric functions, and definite integral calculus.
    PM 141 - CNC Machine Tool Operation II (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    EL 134 L - Lab & Shop Projects (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    Using ladder diagrams, students install the wiring to motor control lab stations. Students will also do troubleshooting after the instructor bugs the station.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    ET 132 - Industrial I (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    David Richins Email Email More info More Info
    Charles Espinoza Email Email More info More Info
    ...Industrial I introduces the principles of two- and three-wire control for motor control circuits. The course will identify various control components such as relays, mag-starters, timers, and sensors, along with the symbols and ladder diagrams needed to make a successful control installation. Studen...
    a section of the Industrial I course in Electrical Technology - ET
    PM 144 E - Machine Externship (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    IN 220 - Industrial Computing I (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Carlos Sanchez Sanchez-Torres Email Email More info More Info
    Curriculum explores configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators.
    ET 122 - Electrical Theory II (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a href="(@@emailUrl0cd8d6d6-278b-4208-8e9e-fca84a37d59a@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course will examine direct current motors and generators beginning with magnetic fields surrounding conductors and coils. From there, students will move into the generation of alternating current and reactive components such as inductors and capacitors in RLC circuits. Students are taught the c...
    What

    Click on a content type above to refine your results.