Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • AU 141 E - Externship (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    AET 122 - Electrical Systems II (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Michael John Roy Email Email More info More Info
    ...This course covers electronic theory, wiring diagrams, test equipment, diagnosis, repair and replacement of electronics, lighting, gauges, and control modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troubleshooting. Upon comple...
    IN 131 - Physics I (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Physical relationships including technical mathematics, uncertainties in measurement, friction, equilibrium, torque, uniformly accelerated motion, projectile motion, trajectories, weight, force, and mass relationships are covered in this section of physics.
    a section of the Physics I course in Industrial Computing & Process - IN
    RE 111 L - Lab & Shop Projects (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...This course bridges theory and practice through hands-on laboratory work. Students develop skills in using electrical and HVAC/R tools and equipment commonly found in the industry. They apply basic electrical theory on trainer boards while improving proficiency. The course introduces techniques for ...
    RE 243 E - Externship (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    ...Students can accept a position as a HVAC/R technician and work in industry under a training externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required as well as some assigned course activities. To be eligible for an externship...
    a section of the Externship course in Refrigeration Technology - RE
    BTA 213 - Computerized Accounting Concepts (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course will provide a hands-on approach to learning QuickBooks that incorporates a thorough understanding of the software while applying knowledge of the accounting cycle.
    IN 141 - Calculus I (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Students learn analytic geometry, equations of curves, curve sketching, functions, and derivatives.
    a section of the Calculus I course in Industrial Computing & Process - IN
    IN 133 L - Lab & Shop Projects (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    AU 111 - Automotive Engine Repair (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    a href="(@@emailUrl69334087-f7b7-4e70-9954-4ead9c3f81b6@)">Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Rogelio C Lopez Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    MOA 144 - Adv. CPT & ICD-10 Coding (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...This course provides students with an understanding of coding scenarios, with an emphasis on medical coding services such as medical visits, diagnostic testing and interpretation, treatments, surgeries, and anesthesia. This course covers advanced coding concepts using step-by-step methods that give ...
    AU 110 - Intro to Automotive Technology (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    z Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Riley Morris Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    AET 130 - Electronics & Accessories (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Darin Peters Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    This course will build upon the study of electricity by introducing the circuitry, diagnosis, and repair of electronic components. This course also covers theory, diagnosis and repair of in cab climate control systems. Students will also be introduced to GPS and telematics.
    IN 141 - Calculus I (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Students learn analytic geometry, equations of curves, curve sketching, functions, and derivatives.
    a section of the Calculus I course in Industrial Computing & Process - IN
    MOA 144 - Adv. CPT & ICD-10 Coding (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...This course provides students with an understanding of coding scenarios, with an emphasis on medical coding services such as medical visits, diagnostic testing and interpretation, treatments, surgeries, and anesthesia. This course covers advanced coding concepts using step-by-step methods that give ...
    IN 220 - Industrial Computing I (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Curriculum explores configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators.
    ET 233 L - Lab & Shop Projects (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a href="(@@emailUrl5e1a5114-4ab1-45f4-a312-c3443465a809@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will practice applied wiring techniques in various hands-on exercises and labs including, but not limited to: conduit bending, switch connections, non-metallic and metallic cable, wire pulling, panel, box, and device installation, and connections.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 141 - CNC Machine Tool Operation II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    BTA 120 - Database & Integration (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Students learn how to create and use databases in Microsoft Access. Here they are able to organize, format, and manipulate large amounts of data for business purposes.
    ET 230 - Safety (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    ET 121 - NEC (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Mr. Michael Haggerty Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    ET 221 - Professional Development (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    MED 115 - Business Math (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...Students will review the basic operations of arithmetic, understand and manage their personal finances, as well as grasp the fundamentals of business finances. This course will prepare students to be smart shoppers, informed taxpayers, and valued employees. Basic math skills will be covered in a...
    a section of the Business Math course in Medical Assistant - MED
    ET 130 - Safety (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Students will explore safety in an industrial setting, covering topics such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the way to use tools, ladders, and other equipment needed in the electrica...
    a section of the Safety course in Electrical Technology - ET
    CST 113 - Construction Blueprint Reading I (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    James Santiago Lopez Email Email More info More Info
    Darin Peters Email Email More info More Info
    This course introduces reading, interpreting, and applying construction blueprints. Topics will include symbols, terminology, floor plans, elevation, and mechanical plans.
    MA 803 - Mastercam Mill Level Three II (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    This course covers machining three-dimensional shapes with the surface rough and surface finish toolpaths. Other topics include surface high speed toolpaths and using a STL stock model to verify a solid model.
    IN 133 L - Lab & Shop Projects (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    ET 240 E - Externship (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Mr. Michael Haggerty Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    ...Students will complete on-the-job training projects doing hands- on electrical wiring installations in residential and commercial buildings. While working for the school, all trainee electrical installations are supervised by a (01) journey level electrician and the work is inspected by the Departme...
    a section of the Externship course in Electrical Technology - ET
    BTA 134 - Business Communications (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tori Bower Email Email More info More Info
    Students learn various forms of written business communications and effective verbal communications including emails, memos, and letters using real life scenarios and case studies, and working effectively in teams.
    IN 222 L - Lab & Shop Projects (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    ...Classroom theory is applied to practical lab assignments utilizing variable frequency drives (VFD’s), 3-phase induction motors, hydraulic and pneumatic systems and components, control valves and positioners, control panels and panel equipment. Physical construction and installation of labs include a...
    IN 240 - Analytical Instruments (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    AU 131 - Automotive Climate Control Systems (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    ...This course covers the theory of refrigeration and heating, including manual and electronic climate control systems. Students are taught the importance of recovery and recycling refrigerant as well as adhering to safety and environmental regulations. Upon completion, students should be able to diagn...
    IT 234 - Human Relations (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    yan Email Email More info More Info
    Kevin Good Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Human Relations will assist students in developing the personal and professional skills necessary for business success. Topics include confidence building, self-concept, and self-esteem, building positive attitudes, motivation, and effective leadership. This course is also designed to prepare the st...
    ET 212 - Industrial III (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    This course will outline the fundamentals and functions of variable frequency drives (VFDs) and interpreting manufacturer manuals. Students will troubleshoot poor power quality and harmonics along with learning skills to correct these symptoms using power quality analyzers.
    a section of the Industrial III course in Electrical Technology - ET
    IT 110 - Electronics Fundamental I (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Basic electronic components and DC circuit operation are introduced including test equipment and tools. DC network analysis, AC circuits, and their effect on reactive components are covered as well. The concepts of teamwork, analytical problem solving, and troubleshooting are introduced. The student...
    PM 144 E - Machine Externship (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    ET 222 - Electrical Theory III (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    ET 240 E - Externship (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    ...Students will complete on-the-job training projects doing hands- on electrical wiring installations in residential and commercial buildings. While working for the school, all trainee electrical installations are supervised by a (01) journey level electrician and the work is inspected by the Departme...
    a section of the Externship course in Electrical Technology - ET
    IN 220 - Industrial Computing I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    Curriculum explores configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators.
    ET 141 - NEC (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    This course will examine and review previously covered NEC articles.
    a section of the NEC course in Electrical Technology - ET
    ET 140 - Safety (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    hmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will explore safety in an industrial setting such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the correct way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    ET 221 - Professional Development (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    ITC 802 - Voice Communications II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    trey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...A continuation of Quarter 7 Voice Communication Systems. The convergence of voice and data, through the development of Computer-Telephone Integration (CTI) and Voice over Internet (VoIP) concepts. Installation, programming, and troubleshooting of PBX and VoIP equipment in a simulated business en...
    ET 221 - Professional Development (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will prepare for an effective career search by learning to create a resume, practicing interviewing skills, and reviewing the job application process. This course will also include a comprehensive look into NFPA 70E standards.
    ET 220 - Safety (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration indicating the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IN 121 - Electrical Fundamentals II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Electrical fundamentals are expanded. Magnetism, magnetic circuits, inductance, capacitance, series and parallel AC circuits, and power in AC circuits. Angles, trigonometric functions, trigonometric tables, solution of right triangles, trigonometric identities and equations, elementary plane vectors...
    RE 131 L - Lab & Shop Projects (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    Shelley Rene Utt Email Email More info More Info
    ...This practical laboratory course focuses on applying control strategies to wire and operate HVAC equipment. Students develop a wide range of wiring diagrams, using actual HVAC units. They gain hands-on experience with heat pumps, oil, gas, and electric forced air HVAC systems. Typical lab projects i...
    IN 140 - Physics II (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    PM 131 - CNC Machine Tool Operation I (2017 Fall Quarter)
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers the manual programming of CNC machining centers. Topics include defining numerical control, machine types and layouts, coordinate geometry, basic machine control features, programming codes, program structure, tool function, reference points, work and tool offsets, and rapid posit...
    ET 143 L - Lab & Shop Projects (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Students will develop, use, and create programs. Students will also use logical diagrams to control the desired process by analyzing inputs and updating outputs by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    ET 222 - Electrical Theory III (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Jeho J. Gutierrez Email Email More info More Info
    Kevin Booze Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    What

    Click on a content type above to refine your results.