Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • RE 120 - Refrigeration & Electric Forced Air (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:30 PM @ *
    Fri: 9:50-8:00 PM @ *
    uve Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...In this course, students explore central forced air electric heating systems and their applications. They employ Ohm's Law theory to calculate CFM by temperature rise in electric heat systems. The curriculum assists with students' understanding of mechanical compression refrigeration systems. Electr...
    IT 212 - Cisco Networking I B (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    gana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This Cisco Networking course teaches students the skills necessary to support networks and the applications riding on them. The students can follow data along the switches and routers focusing on data security and best practices. Students may be eligible to apply for network operations, application ...
    MA 123 L - Machine Lab (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Classroom theory on the operation and set-up of engine lathes will be applied in the shop. Operations will include turning, thread cutting, grooving, drilling, and tapping. Also covered are the set-ups of fourjaw chucks, follower rests, and steady rests.
    a section of the Machine Lab course in Machine Technology - MA
    IN 133 L - Lab & Shop Projects (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    MED 126 - Human Body in Health & Disease I (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    ...An introduction to the structure and funciton of the human body utilizing a system approach. Emphasis placed on human anatomy as well as the physiology of the cell, skeletal system, muscular system, nervous system, cardiovascular, respiratory, urinary, reproductive, endocrine, digestive, lymphatic, ...
    ITC 141 - Digital Electronics II (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    A continuation of Digital Electronics I. Analysis, design, and operation of digital circuits.
    ITC 240 - Voice Communication Systems II (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...A continuation of Quarter 7 Voice Communication Systems. The convergence of voice and data, through the development of Computer-telephone Integration (CTI) and Voice over Internet (VoIP) concepts. Installation, programming and troubleshooting of PBX and VoIP equipment in a simulated business en...
    PTD 100 C2 - Professional Truck Driving (2023 PTD Fall)
    Mon, Tue, Wed, Thu: 7-3:30 PM @
    Email Email More info More Info
    Gustavo Saucedo Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Professional Truck Driving
    AET 141 - Power Train Theory II (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Rundgren Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    This course will focus on proper repair techniques and diagnosis of transmissions. Students should be able to demonstrate skills in working with differentials, torque converters, clutches, planetary drive axles, and power take-off units.
    IN 231 - Digital Fundamentals (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    PM 112 - Machine Tool Practices I (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    ET 112 - Electrical Theory I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    rd Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    IN 221 - Instrumentation IV (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    MED 142 - Pharmacology I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Adilene Esperanza Huerta Email Email More info More Info
    ...Provides a basic knowledge of pharmacology, including the legal and ethical issues; terms and abbreviations; involvement of governmental agencies; role of providers and allied health professionals; and reading, interpreting and documenting medication orders. This class includes the administration of...
    a section of the Pharmacology I course in Medical Assistant - MED
    ITC 140 - Comm. & Wireless Electronics II (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...Installation and configuration of Windows server. Configuration of virtual machines and networks, DHCP and DNS services, domain controllers and active directory along with group policy and security policies. Preparation for the Microsfot Server certification. Technical knowledge acquired in the clas...
    IN 244 E - Externship (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    IN 243 L - Lab & Shop Projects (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    PM 123 L - Machine Lab (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    ET 121 - NEC (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Doug Jenkins Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    EL 114 L - Lab & Shop Projects (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Introduction to proper drawings and schematics utilizing conductors, cables, switches, receptacles and lighting fixtures. Safe and practical application of classroom instruction on actual equipment. Proper use of personal protective equipment and tools to install and troubleshoot conductors, cab...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    EL 130 - AC Motors (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Single-phase motor hook-ups; reversing externally reversible motors; four major parts of a motor; run winding/start windings; using an OHM meter; and properly connect to line voltages. Three-phase wye connected; high and low voltage connections; delta high and low voltage connections; identify, ...
    a section of the AC Motors course in Electrical Technology - EL
    IN 212 - Motor Control (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    ET 111 - NEC/WAC/RCW (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Desiree M. Bowman Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    PL 132 E - Externship (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    whorn Email Email More info More Info
    Mr. Kasey Johns Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required.
    a section of the Externship course in Plumbing Technician - PL
    AET 141 - Power Train Theory II (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rres Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    This course will focus on proper repair techniques and diagnosis of transmissions. Students should be able to demonstrate skills in working with differentials, torque converters, clutches, planetary drive axles, and power take-off units.
    EL 112 - National Electric Code/WAC Code (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Minimum standards for safe installation and maintenance of electrical systems utilizing the L&I adopted edition of National Fire Protection Association (NFPA Volume 70) WAC 296 46B Rules and Regulations that supersede the NEC minimum standards that are enforced and practiced in the industry, and...
    BTA 125 - Business English II (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course is a continuation from Business English I and basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum o...
    IN 211 - Instrumentation III (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    ITC 231 - Voice Communication Systems I (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Installation, programming, and troubleshooting of business telephone systems including key systems, hybrids, and an introduction to PBX switching equipment in a simulated business environment. Transmission lines and long distance networks, which tie telephone switches together, are covered. Cus...
    IT 144 - Communications (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 10:10-11:20 AM @ *
    r Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    ...This course will focus on the basics of technical writing and documentation, along with verbal communications and working as a team. Students study and apply communication techniques, problem resolution skills, and how to handle difficult situations with an emphasis on customer service. This course ...
    WLD 110 - Introduction to Welding (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Clayton LeGrand Houston Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    RE 220 - Commercial Refrigeration II (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    t Email Email More info More Info
    Jairo Ismael Torres Email Email More info More Info
    ...Building upon the foundation laid in Commercial Refrigeration I, this course delves into advanced commercial refrigeration. Students explore medium temperature and low-temperature applications in greater depth, with a focus on identifying refrigeration flow problems and understanding standard operat...
    BTA 122 - Business Presentation (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course provides instruction in delivering business presentations and developing presentation materials. Students will create a variety of charts, graphs, and interactive presentations with the primary use of PowerPoint. Students will be encouraged to complete the MOS certification in PowerPoint...
    AU 112 - Basic Automotive Electrical Systems (2018 Winter Quarter)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    AET 123 E - Externship (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    oy Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    ET 213 L - Lab & Shop Projects (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    WLD 210 - Intro to Shielded Metal Arc Welding (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    Savannah Shields Email Email More info More Info
    Intro to Shielded Metal Arc Welding
    IT 112 - Math for Technical Applications (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course will focus on the basic technical applications of mathematics to include solving and applying algebraic expressions including factoring & graphing, as well as order of operations, exponents, significant numbers, addition/subtraction of positive and negative numbers, fractions, multiplica...
    AU 112 - Basic Automotive Electrical Systems (2019 Spring Quarter)
    Mon, Tue, Wed, Thu, Fri: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    BTA 143 - Economics (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    ...This course is designed to help students understand the basics of economics such as demand, supply, opportunity cost, and key economic indicators. Students will develop an understanding of how economics affects their everyday lives, how to analyze economic data, and how to use economics to make busi...
    a section of the Economics course in BUSINESS TECH. & ACCOUNTING - BTA
    EL 130 - AC Motors (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Single-phase motor hook-ups; reversing externally reversible motors; four major parts of a motor; run winding/start windings; using an OHM meter; and properly connect to line voltages. Three-phase wye connected; high and low voltage connections; delta high and low voltage connections; identify, ...
    a section of the AC Motors course in Electrical Technology - EL
    AU 131 - Automotive Climate Control Systems (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    ...This course covers the theory of refrigeration and heating, including manual and electronic climate control systems. Students are taught the importance of recovery and recycling refrigerant as well as adhering to safety and environmental regulations. Upon completion, students should be able to diagn...
    EL 504 L - Lab & Shop Projects (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Lab & Shop Projects
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    IN 142 - Instrumentation II (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    MOA 136 - Intermediate CPT & ICD-10 Coding (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...This course will serve as a continuation of basic diagnostic coding and the characteristics and conventions of ICD-10-CM coding. A brief history of ICD-9 and the transition to ICD-10-CM will be covered. Students will analyze and discuss case studies using more complex code assignments with ICD-10-CM...
    IN 804 L - Lab & Shop Projects (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Classroom theory will be applied to practical lab assignments and simulators, using Microsoft Word and AutoCad. Safety is stressed at all times.
    WLD 143 - AWS/WABO Certification Prep Course (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    er Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    This course prepares students to sit for the American Welding Society (AWS) and Washington Association of Building Officials (WABO) welding certification tests. Students will receive review instruction in the classroom and lab environments pertaining to various welding codes.
    PM 144 E - Machine Externship (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    ET 113 L - Lab & Shop Projects (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    James H. Gabbard Email Email More info More Info
    ...Starting with drawing of schematics, students will practice safe and practical application of classroom instruction through wiring residential switch and receptacle labs. Students will also demonstrate use of personal protective equipment and tools to install and troubleshoot conductors, switches, r...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    PM 120 - Industrial Mathematics II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers the fundamentals of plane geometry. Common shop problems are solved by applying the geometric principles of triangles, common polygons, and circles. Other topics covered include area and volume calculations, trigonometric functions as they apply in the machine trades, calculations...
    What

    Click on a content type above to refine your results.