Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • MOA 137 - Medical Reimbursement I (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...Students will study federal, state, and private health insurance plans including managed care systems. Students are taught the processing cycle of health insurance claims, health insurance terminology, reimbursement methodologies for professional services, and proper completion of the 1500 billing f...
    ET 132 - Industrial I (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Industrial I introduces the principles of two- and three-wire control for motor control circuits. The course will identify various control components such as relays, mag-starters, timers, and sensors, along with the symbols and ladder diagrams needed to make a successful control installation. Studen...
    a section of the Industrial I course in Electrical Technology - ET
    WLD 142 E - Externship (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Welding Technology - WLD
    IN 122 L - Lab & Shop Projects (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    BTA 142 - Business Ethics (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides opportunities for students to learn through discussion.
    IT 242 - Limited Energy (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    ...Limited Energy Systems: Alarms and amplified sound. Fire alarm system installation, programming, and troubleshooting are covered. Proper installation practices are covered in accordance with the National Electrical Code and NFPA 72: National Fire Alarm Code. Amplified sound and speaker systems, incl...
    AU 141 E - Externship (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Automotive Technology - AU
    PM 141 - CNC Machine Tool Operation II (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...A continuation of CNC Machine Tool Operation I, this course covers the manual programming of CNC machining centers. Topics include cutter diameter compensation, plane selection, circular interpolation contour milling, face milling, and machining slots and pockets. Also covered are turning and boring...
    ET 223 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will have the opportunity to practice wiring transformers and generating electricity with photovoltaic systems. Students will also utilize thermal imaging technology to diagnose potential issues and develop plans for remedy and repair.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MOA 135 - Computers in Health Care (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    Overview of commonly available software tools used in health care. Introduction to the electronic health record process and medical office database management software found in American health care delivery.
    AU 131 - Automotive Climate Control Systems (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    ...This course covers the theory of refrigeration and heating, including manual and electronic climate control systems. Students are taught the importance of recovery and recycling refrigerant as well as adhering to safety and environmental regulations. Upon completion, students should be able to diagn...
    CST 130 - Exterior Finishing (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rbin Email Email More info More Info
    Rob Blazina Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    This course includes the installation, finishing of wall coverings (siding installation), and exterior trim. Students will install windows, doors, waterproofing, and utilize tools specifically designed for exterior finishing. Students will practice using ladders and scaffolds.
    a section of the Exterior Finishing course in Construction - CST
    IN 132 - Instrumentation I (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    IT 143 - Network Server OS Services Lab (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating system services in a lab environment. Students will demonstrate additional advanced services, utilities and administration of various network architectures/topologies in virtualized environments, ...
    BTA 130 - Fundamentals of Accounting (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tori Bower Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...In an introduction to accounting, students are taught accounting concepts and procedures to include debits and credits, the general journal, general ledger, accounting cycle, banking and cash handling procedures, and payroll entries. The objective of this course is to give students a foundation in a...
    IT 110 - Electronics Fundamental I (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Basic electronic components and DC circuit operation are introduced including test equipment and tools. DC network analysis, AC circuits, and their effect on reactive components are covered as well. The concepts of teamwork, analytical problem solving, and troubleshooting are introduced. The student...
    IN 230 - Programmable Logic Controllers (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Derek P. Floyd Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    The course provides an overview of PLCs, PLC hardware components, fundamentals of logic, basics of PLC programming, developing PLC ladder and wiring diagrams, and basic PLC functions.
    IN 132 - Instrumentation I (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    IT 144 - Communications (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 10:10-11:20 AM @ *
    Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...This course will focus on the basics of technical writing and documentation, along with verbal communications and working as a team. Students study and apply communication techniques, problem resolution skills, and how to handle difficult situations with an emphasis on customer service. This course ...
    AU 110 - Intro to Automotive Technology (2021 Fall Quarter)
    Mon, Tue, Wed, Thu, Fri: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    ITC 223 L - Cisco Lab. Instruction III (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Mike Smith Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    Application of the technical knowledge acquired in ITC 601 Cisco Networking III.
    EL 233 L - Lab & Shop Projects (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    ...Lab time will give students the opportunity to apply the use of training equipment including oscilloscopes, signal generators and DC power supplies, used with solid state components to determine how and why they operate. Introducing green technology with solar energy sources and storing and con...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    RE 120 - Refrigeration & Electric Forced Air (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:30 PM @ *
    Fri: 9:50-8:00 PM @ *
    uve Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...In this course, students explore central forced air electric heating systems and their applications. They employ Ohm's Law theory to calculate CFM by temperature rise in electric heat systems. The curriculum assists with students' understanding of mechanical compression refrigeration systems. Electr...
    IT 212 - Cisco Networking I B (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    gana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This Cisco Networking course teaches students the skills necessary to support networks and the applications riding on them. The students can follow data along the switches and routers focusing on data security and best practices. Students may be eligible to apply for network operations, application ...
    MA 123 L - Machine Lab (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Classroom theory on the operation and set-up of engine lathes will be applied in the shop. Operations will include turning, thread cutting, grooving, drilling, and tapping. Also covered are the set-ups of fourjaw chucks, follower rests, and steady rests.
    a section of the Machine Lab course in Machine Technology - MA
    IN 133 L - Lab & Shop Projects (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    MED 126 - Human Body in Health & Disease I (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    ...An introduction to the structure and funciton of the human body utilizing a system approach. Emphasis placed on human anatomy as well as the physiology of the cell, skeletal system, muscular system, nervous system, cardiovascular, respiratory, urinary, reproductive, endocrine, digestive, lymphatic, ...
    ITC 141 - Digital Electronics II (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    A continuation of Digital Electronics I. Analysis, design, and operation of digital circuits.
    ITC 240 - Voice Communication Systems II (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...A continuation of Quarter 7 Voice Communication Systems. The convergence of voice and data, through the development of Computer-telephone Integration (CTI) and Voice over Internet (VoIP) concepts. Installation, programming and troubleshooting of PBX and VoIP equipment in a simulated business en...
    PTD 100 C2 - Professional Truck Driving (2023 PTD Fall)
    Mon, Tue, Wed, Thu: 7-3:30 PM @
    Email Email More info More Info
    Gustavo Saucedo Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Professional Truck Driving
    AET 141 - Power Train Theory II (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Rundgren Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    This course will focus on proper repair techniques and diagnosis of transmissions. Students should be able to demonstrate skills in working with differentials, torque converters, clutches, planetary drive axles, and power take-off units.
    IN 231 - Digital Fundamentals (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    PM 112 - Machine Tool Practices I (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers general shop safety as well as procedures for each group of machine tools. Topics include clothing, eye protection, lifting, first aid, and CPR. Also covered are the operation and setup of turning machines, drill presses, sawing machinery, and shop presses along with an introducti...
    ET 112 - Electrical Theory I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    rd Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    IN 221 - Instrumentation IV (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    MED 142 - Pharmacology I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Adilene Esperanza Huerta Email Email More info More Info
    ...Provides a basic knowledge of pharmacology, including the legal and ethical issues; terms and abbreviations; involvement of governmental agencies; role of providers and allied health professionals; and reading, interpreting and documenting medication orders. This class includes the administration of...
    a section of the Pharmacology I course in Medical Assistant - MED
    ITC 140 - Comm. & Wireless Electronics II (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...Installation and configuration of Windows server. Configuration of virtual machines and networks, DHCP and DNS services, domain controllers and active directory along with group policy and security policies. Preparation for the Microsfot Server certification. Technical knowledge acquired in the clas...
    IN 244 E - Externship (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    IN 243 L - Lab & Shop Projects (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    PM 123 L - Machine Lab (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    ET 121 - NEC (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Doug Jenkins Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    EL 114 L - Lab & Shop Projects (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    ...Introduction to proper drawings and schematics utilizing conductors, cables, switches, receptacles and lighting fixtures. Safe and practical application of classroom instruction on actual equipment. Proper use of personal protective equipment and tools to install and troubleshoot conductors, cab...
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    EL 130 - AC Motors (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    on Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Single-phase motor hook-ups; reversing externally reversible motors; four major parts of a motor; run winding/start windings; using an OHM meter; and properly connect to line voltages. Three-phase wye connected; high and low voltage connections; delta high and low voltage connections; identify, ...
    a section of the AC Motors course in Electrical Technology - EL
    IN 212 - Motor Control (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    ET 111 - NEC/WAC/RCW (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Desiree M. Bowman Email Email More info More Info
    ...While learning to navigate the National Electrical Code (NEC), students will be introduced to minimum standards for safe installation, maintenance, and repair of electrical systems. This course will also cover the Washington Administrative Codes (WAC) that supersede the NEC and Revised Code of Washi...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    PL 132 E - Externship (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    whorn Email Email More info More Info
    Mr. Kasey Johns Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required.
    a section of the Externship course in Plumbing Technician - PL
    AET 141 - Power Train Theory II (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    rres Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    This course will focus on proper repair techniques and diagnosis of transmissions. Students should be able to demonstrate skills in working with differentials, torque converters, clutches, planetary drive axles, and power take-off units.
    EL 112 - National Electric Code/WAC Code (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Minimum standards for safe installation and maintenance of electrical systems utilizing the L&I adopted edition of National Fire Protection Association (NFPA Volume 70) WAC 296 46B Rules and Regulations that supersede the NEC minimum standards that are enforced and practiced in the industry, and...
    BTA 125 - Business English II (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course is a continuation from Business English I and basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum o...
    IN 211 - Instrumentation III (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    What

    Click on a content type above to refine your results.