Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • IT 244 E - Externship (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Iinfo. Tech & Comm. Systems - IT
    CST 110 - Introduction to Construction (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl3ece2965-633b-4601-ad61-c8b5cd8570c5@)">Email Email More info More Info
    Christopher Corbin Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, systems, and terms of the construction industry. Topics include the building process, materials, building systems, and construction components. Completion of the ...
    IN 141 - Calculus I (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    Students learn analytic geometry, equations of curves, curve sketching, functions, and derivatives.
    a section of the Calculus I course in Industrial Computing & Process - IN
    BTA 111 - Keyboarding I (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    In this course students learn beginning typing and 10-key skills. The objectives are for students to learn how to type by touch and how to take a timed keyboarding/10-key test for accuracy and speed.
    BTA 115 - Business Math (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course covers math functions applied to business scenarios and concepts including calculating interest; solving for portion, base, and rate; and calculating discounts and invoice terms. This course should prepare students to be smart shoppers, informed taxpayers, and valued employees. Basic mat...
    IT 240 - Low Voltage Systems II (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    (continuation of the IT 232 Low Voltage Systems I class) Students receive advanced theory and training in additional low voltage and communication systems and peripheral devices. Proper installation practices in accordance with codes and standards are also covered.
    MOA 605 - Specialty Coding (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Danette L. Muntz Email Email More info More Info
    Specialty Coding
    IN 142 - Instrumentation II (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    This course covers instrumentation concepts, calibration, analog and smart transmitters, transducers, and process variables.
    ET 232 - Construction I (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    a href="(@@emailUrl5e1a5114-4ab1-45f4-a312-c3443465a809@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course will introduce terms, symbols, layout, organization, and structure of plans that are used for residential, commercial, and industrial buildings. Students are taught how to understand and interpret prints for identification of code violations, conflicts of space, and safety issues. Studen...
    a section of the Construction I course in Electrical Technology - ET
    IN 243 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    EL 144 L - Lab & Shop Projects (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Students will develop, use, and create programs and use logical diagrams to control the desired process by analyzing inputs and updating outputs and by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    EL 230 - Solid State Electronic Fundamentals (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Function and operation of diodes, SCRs, triacs, diacs, UJTs and their use in rectification and control of current by the switching of PN junctions. Construction, theory, and operation of transistors and their applications to control voltage levels. Basic operation and theory of the op-amp.
    CST 122 - Construction Blueprint Reading II (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Darin Peters Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course will introduce reading foundation plans, section views, roof framing plans and plot/site plans. Students will learn about various types of residential and commercial blueprints.
    MOA 210 - Business Communication (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Lashel Church Email Email More info More Info
    Students learn how to establish credibility in the workplace as well as the principles of interpersonal communication. This course will equip students with the skills they need for team communication, difficult conversations, managing meetings, and creating business messages.
    IN 213 L - Lab & Shop Projects (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    IN 244 E - Externship (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    IPC 100 - Industrial Prep Course (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-11:00 AM @ *
    Email Email More info More Info
    Jill Wheeling Email Email More info More Info
    Industrial Prep Course
    RE 231 L - Lab & Shop Projects (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course allows students to receive hands-on experience operating, servicing, and repairing industrial heating and cooling systems. It allows students to apply the knowledge and skills they have learned in a practical setting to functioning labs and equipment. The related projects in the course w...
    IN 242 - Employment Preparation (2026 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    PL 111 - Plumbing Fundamentals I (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    Email Email More info More Info
    Lee Crane Email Email More info More Info
    Tim M Bushnell Email Email More info More Info
    This course introduces students to fittings (plastic, copper, cast iron, and steel) in addition to water distribution systems. Students are taught how to identify and select hand tools, materials, load ratings, and equipment used in basic rigging to move materials and equipment.
    IPC 100 - Industrial Prep Course (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-11:00 AM @ *
    Email Email More info More Info
    Industrial Prep Course
    BTA 114 - Business English I (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course emphasizes basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate a grasp of basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum of errors in sentence str...
    RE 211 L - Lab & Shop Projects (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    ...This comprehensive laboratory and shop course provides hands-on evaluation and repair opportunities with a diverse array of operational refrigeration equipment. Students gain practical experience in setting, adjusting, evaluating, programming, and wiring a wide variety of commercial refrigeration eq...
    MED 111 - Business English (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    A concentrated review of sentence writing, this course emphasizes sentence combining, basic mechanics, and paragraph writing.
    a section of the Business English course in Medical Assistant - MED
    IN 602 - Digital Fundamentals (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Carlos Sanchez Sanchez-Torres Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    Introductory digital concepts, number systems, operations, and codes, logic gates are covered along with Boolean algebra and logic simplification, combinational logic, functions of combinational logic, flip-flops, and related devices.
    IN 230 - Programmable Logic Controllers (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    alt Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    The course provides an overview of PLCs, PLC hardware components, fundamentals of logic, basics of PLC programming, developing PLC ladder and wiring diagrams, and basic PLC functions.
    ET 131 - NEC (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Mr. Josh Jackson Email Email More info More Info
    This course will cover NEC requirements for motor circuits. Students will determine sizes of conductors, overloads, overcurrent protection and disconnecting means for motor circuits. Previously covered NEC will be added to these calculations such as proper grounding and bonding.
    a section of the NEC course in Electrical Technology - ET
    IN 131 - Physics I (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Physical relationships including technical mathematics, uncertainties in measurement, friction, equilibrium, torque, uniformly accelerated motion, projectile motion, trajectories, weight, force, and mass relationships are covered in this section of physics.
    a section of the Physics I course in Industrial Computing & Process - IN
    IN 222 L - Lab & Shop Projects (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Carlos Sanchez Sanchez-Torres Email Email More info More Info
    ...Classroom theory is applied to practical lab assignments utilizing variable frequency drives (VFD’s), 3-phase induction motors, hydraulic and pneumatic systems and components, control valves and positioners, control panels and panel equipment. Physical construction and installation of labs include a...
    IN 221 - Instrumentation IV (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Carlos Sanchez Sanchez-Torres Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    MA 302 - Intermediate Blueprint Reading I (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Thread representation, knurling, assembly drawings, fractional and decimal definitions, review of elementary, blueprint, reading for machinists.
    ET 211 - NEC/WAC/RCW (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    ...This course will cover how to calculate the ampacity of service, feeder and branch circuit conductors, and the ampacity rating of the panels they supply. Students will also revisit the Washington Administrative Code (WAC) and Revised Code of Washington (RCW) requirements for the electrical industry ...
    a section of the NEC/WAC/RCW course in Electrical Technology - ET
    BTA 144 - Business Law (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Business Law will focus on legal issues in the workplace and the legal system as it pertains to business transactions. Topics include contract formation and performance, real property, product liability, and employer/employee relations.
    a section of the Business Law course in BUSINESS TECH. & ACCOUNTING - BTA
    AET 143 - Hydraulic Systems II (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrl12dae0be-51a2-4657-855e-ca48a9295120@)">Email Email More info More Info
    Nicholas J Owens Email Email More info More Info
    Caleb Micheal Miller Email Email More info More Info
    matt Bishop Email Email More info More Info
    Everardo M. Torres Email Email More info More Info
    ...During this course, students are taught how to apply diagnostic steps to pinpoint hydraulic system failures. Students are taught how to check for pressure and flow on live applications to aid in diagnosing hydraulic control systems. Students will also be introduced to hydrostatic transmission system...
    MD 112 - Medical Terminology (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    nza Huerta Email Email More info More Info
    This course is designed to teach students to accurately spell, pronounce, and define common medical terms related to major disease processes, diagnostic procedures, laboratory tests, abbreviations (including legal), drugs, and treatment modalities.
    a section of the Medical Terminology course in Medical Assistant - MD
    EL 124 L - Lab & Shop Projects (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Maria J. Werremeyer Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Using ladder diagrams, students install the wiring to motor control lab stations. Students will also perform troubleshooting after the instructor bugs the station.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    AU 111 - Automotive Engine Repair (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 12-10:00 PM @ *
    ell Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    PM 111 - Elementary Blueprint Reading I (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Develops the skills needed to read and interpret industrial drawings. Topics covered include drawing layouts, drawing symbols, and the different drawing views used to describe machined parts.
    IN 240 - Analytical Instruments (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    IT 121 - Electronics Fundamentals II Lab (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Matthew D. Sund Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to practical advanced electronic circuits in a lab environment. Students will use advanced electronic components (diodes, transistors, integrated circuits, op-amps) to construct digital circuits and use application/test equi...
    AU 111 - Automotive Engine Repair (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Sam Perez Email Email More info More Info
    Mr. Ken I. Waggener Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    ET 131 - NEC (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    n Email Email More info More Info
    Adam Rieker Email Email More info More Info
    This course will cover NEC requirements for motor circuits. Students will determine sizes of conductors, overloads, overcurrent protection and disconnecting means for motor circuits. Previously covered NEC will be added to these calculations such as proper grounding and bonding.
    a section of the NEC course in Electrical Technology - ET
    RE 221 L - Lab & Shop Projects (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    orres Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...This hands-on laboratory and shop project course enables students to further develop by working with a diverse range of operational refrigeration equipment, including walk-in coolers, freezers, ice machines, reach-in units, undercounter units, and supermarket rack systems. Students gain knowledge in...
    IN 240 - Analytical Instruments (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    CST 121 - Construction Fundamentals II (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Darin Peters Email Email More info More Info
    ...This course covers roof framing methods for residential construction. Students will learn about layout, floor and wall framing concepts as well as the framing of stairs. Students will learn about building codes, rafter nomenclature, ceiling joists, and collar ties. Students are given the opportunity...
    IT 121 - Electronics Fundamentals II Lab (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    d Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to practical advanced electronic circuits in a lab environment. Students will use advanced electronic components (diodes, transistors, integrated circuits, op-amps) to construct digital circuits and use application/test equi...
    BTA 125 - Business English II (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course is a continuation from Business English I and basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum o...
    IT 223 - Cisco Networking III Lab (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Francisco C Magana Email Email More info More Info
    ...This course introduces higher end networking concepts to the CCNA networking students like network design and architecture. Networks running dynamic routing protocols using RIP, EIGRP, and OSPF though a NAT enabled router will be covered. The student will also gain knowledge to configure secure scal...
    CST 130 - Exterior Finishing (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Lopez Email Email More info More Info
    Darin Peters Email Email More info More Info
    This course includes the installation, finishing of wall coverings (siding installation), and exterior trim. Students will install windows, doors, waterproofing, and utilize tools specifically designed for exterior finishing. Students will practice using ladders and scaffolds.
    a section of the Exterior Finishing course in Construction - CST
    What

    Click on a content type above to refine your results.