Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • RE 221 L - Lab & Shop Projects (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    ...This hands-on laboratory and shop project course enables students to further develop by working with a diverse range of operational refrigeration equipment, including walk-in coolers, freezers, ice machines, reach-in units, undercounter units, and supermarket rack systems. Students gain knowledge in...
    EL 306 - NEC & Load Sizing Calculations (2013-2014 SUMMER TRIMESTER)
    Covering code article 220 & 240 calculating the ampacity of service conductors, feeder conductors, branch circuit conductors, and the amp rating of the panels and load centers they supply, along with the overcurrent devices used to protect them.
    EL 221 - Three-Phase Systems & Distribution (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    an Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Operational characteristics of three-phase generators – including hydro, solar and wind – and their connection to transformers for the purpose of cross-country power transmission. Circuit characteristics of the transmission and distribution system, the purpose and function of power substations,...
    BTA 223 E - Externship (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in BUSINESS TECH. & ACCOUNTING - BTA
    ET 213 L - Lab & Shop Projects (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    esney Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    EL 222 - Transformer Connections (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Camden J. Duncan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...ASA, NEMA, and industrial standards for transformer lead identification and polarity requirements. Practical application of single-phase isolation type transformer configurations. Practical application of three-phase configurations for isolation type transformers. Practical application of single...
    ET 121 - NEC (2021 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Mr. Michael Haggerty Email Email More info More Info
    Doug Jenkins Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    IN 222 L - Lab & Shop Projects (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Classroom theory is applied to practical lab assignments utilizing variable frequency drives (VFD’s), 3-phase induction motors, hydraulic and pneumatic systems and components, control valves and positioners, control panels and panel equipment. Physical construction and installation of labs include a...
    ET 210 - Safety (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    esney Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    ...Students will explore safety in an industrial setting such as meter use, personal protective equipment, and lock- out, tag-out, try-out. The Electrical Department holds weekly safety meetings that include a safety demonstration to show the correct way to use tools, ladders, and other equipment neede...
    a section of the Safety course in Electrical Technology - ET
    CST 112 - Construction Fundamentals I (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course introduces students to framing, estimating, material selection, construction math, power tool usage, and pneumatic nail gun usage. Students will receive training on power tool handling (knowledge that will continue throughout the program). In addition, students will study compaction and ...
    a section of the Construction Fundamentals I course in Construction - CST
    ITC 230 - Basic Telephony & Cabling Standards (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Preparation of the student for entry into the telephone industry. Cabling installation, telephone sets and local loop are covered. The history of the industry and industry terms are presented. National Electrical Code and industry cabling and equipment standards are covered. Data cable installer...
    IN 221 - Instrumentation IV (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Kody L. Pitner Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    AU 130 - Auto. Engine Perf. & Drivability (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers the introduction, theory of operation, and diagnostic procedures used to locate engine performance concerns. Topics will include currently used fuel-injected systems, computerized ignition, injection components, emission control, OBD II (on-board diagnostics), and interrelated...
    ET 222 - Electrical Theory III (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Keith Butler Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    CST 132 E - Externship (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Mr. Andy Rutrough Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Construction - CST
    EL 143 - Safety Meetings (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    AU 111 - Automotive Engine Repair (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 4:15-10:00 PM @ *
    Fri: 10-8:00 PM @ *
    Email Email More info More Info
    Riley Morris Email Email More info More Info
    Michael D. Powell Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    BTA 110 - Computer Applications (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course introduces the basics of computer usage and provides training for Microsoft Outlook, OneDrive, and Publisher, along with Adobe Acrobat Reader. The objective is to allow students to be more comfortable working with personal computers daily. Completion of the PTI 101 Workshop is encouraged...
    EL 221 - Three-Phase Systems & Distribution (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Camden J. Duncan Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...Operational characteristics of three-phase generators – including hydro, solar and wind – and their connection to transformers for the purpose of cross-country power transmission. Circuit characteristics of the transmission and distribution system, the purpose and function of power substations,...
    EL 222 - Transformer Connections (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    pley Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...ASA, NEMA, and industrial standards for transformer lead identification and polarity requirements. Practical application of single-phase isolation type transformer configurations. Practical application of three-phase configurations for isolation type transformers. Practical application of single...
    ET 143 L - Lab & Shop Projects (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    hmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will develop, use, and create programs. Students will also use logical diagrams to control the desired process by analyzing inputs and updating outputs by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MD 123 - Clinical Procedures II (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    tz Email Email More info More Info
    ...In this course techniques are taught to enable students to perform the laboratory procedures conducted in physicians’ offices. Information regarding laboratory measurements, use of laboratory equipment, collection and processing of specimens, microbiology, phlebotomy, and blood testing is presented....
    a section of the Clinical Procedures II course in Medical Assistant - MD
    CST 140 - Interior Finishing (2021 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Mr. Andy Rutrough Email Email More info More Info
    Christopher Corbin Email Email More info More Info
    Students will complete material trim installation and estimate trim quantities and costs. Students will be exposed to base, casing, crown, and wainscot panel molding as well as interior door and window surrounds. Cabinetry installation will also be taught.
    a section of the Interior Finishing course in Construction - CST
    MOA 143 - Medical Office Procedures (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Samantha J. Paradis Email Email More info More Info
    ...This course introduces and teaches the tasks of a medical office assistant’s career: how to perform administrative functions, records management, medical communications, scheduling appointments, and an introduction to patient billing and processing insurance claims. Emphasis is placed on developing ...
    WLD 110 - Introduction to Welding (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    ...This course offers an introduction to safety practices and procedures that will be most adhered to in the welding industry. Safety considerations will include proper clothing, eye protection, and workplace hazards. Students will be required to complete the OSHA 10 web-based training and web certific...
    MED 213 - Clinical Procedures II (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Ruby Aguilar Email Email More info More Info
    Cheryl Johnson Email Email More info More Info
    ...Techniques are taught to enable students to perform the routine laboratory procedures conducted in physicians’ offices. Information regarding laboratory mathematics and measurement, use of laboratory equipment, collection and processing of specimens, microbiology, phlebotomy, and routine blood ...
    a section of the Clinical Procedures II course in Medical Assistant - MED
    ET 113 L - Lab & Shop Projects (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Desiree M. Bowman Email Email More info More Info
    ...Starting with drawing of schematics, students will practice safe and practical application of classroom instruction through wiring residential switch and receptacle labs. Students will also demonstrate use of personal protective equipment and tools to install and troubleshoot conductors, switches, r...
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    ET 140 - Safety (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    hmann Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will explore safety in an industrial setting such as meter use, personal protective equipment and lock-out, tag-out, try-out. Weekly safety meetings are held and include safety demonstrations showing the correct way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    IT 132 - Computer Software Fundamentals (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Installation, operation, management and troubleshooting of computer operating systems and software applications are introduced. Preparation for the CompTIA A+ certification. Different operating systems, configurations and virtualization software are demonstrated as students learn the theory of opera...
    IN 211 - Instrumentation III (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course covers process and instrumentation diagramming, loop sheets, electrical diagramming, proportional, integral and derivative controls, and tuning controllers.
    ET 121 - NEC (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    This course will review and build upon the code previously covered in the program with the addition of articles relating to reactors such as capacitors and inductors.
    a section of the NEC course in Electrical Technology - ET
    WLD 112 - Introduction to Print Reading (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    IN 132 - Instrumentation I (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    ...Introduction to instrumentation and control provides an overview of industrial instrumentation including instrumentation diagrams, calibration standards, loops, calibration procedures and documentation. Topics will also include temperature measurement, conversions, sensing elements and transmitter f...
    AU 111 - Automotive Engine Repair (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Isaac Espinoza Email Email More info More Info
    Ron A. Dexter Email Email More info More Info
    ...This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information....
    EL 140 - Introduction to Digital (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Examination of several different numbering systems, including but not limited to logic gates, numbering systems, conversions and combination logic.
    MOA 126 - Intro to CPT & ICD-10 Coding (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    This course is an introduction to basic coding concepts. Focus is placed on using official coding guidelines correctly and the course includes extensive practice coding exercises.
    PM 132 - Mastercam Mill Level One I (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    AU 133 - Gasoline and Disel Engine Mgmt Syst (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This course covers introduction, theory of operation, service, and repair, as well as diagnostic procedures on today’s modern engines. Topics include computerized ignition systems, gasoline fuel injection systems, emission control systems, and on-board diagnostics. This training course also covers d...
    IN 240 - Analytical Instruments (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Students will explore applications and implementation of process analyzer systems and study chemistry as it pertains to process analyzers. Theory and operation of electrochemical and compositional process analyzers will be covered.
    MED 143 - Clinical Procedures I (2020 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    tz Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...Demonstrations are provided on assisting the physician in performing physical examinations. Emphasis is placed on obtaining the medical history, measure or vital signs, auditory and visual testing, exam room preparation, equipment set-up, and proper positioning and draping of patients. Patient c...
    a section of the Clinical Procedures I course in Medical Assistant - MED
    BTA 222 - Customer Service (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    This course emphasizes how to provide excellent customer service. Students learn proper telephone skills, problem resolution skills, and how to handle difficult situations.
    EL 404 - Articles 450, 500, 680 NEC (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Brock Byers Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    NEC articles - 450, 500, and 680.
    IN 222 L - Lab & Shop Projects (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Sanchez-Torres Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Classroom theory is applied to practical lab assignments utilizing variable frequency drives (VFD’s), 3-phase induction motors, hydraulic and pneumatic systems and components, control valves and positioners, control panels and panel equipment. Physical construction and installation of labs include a...
    RE 131 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...This practical laboratory course focuses on applying control strategies to wire and operate HVAC equipment. Students develop a wide range of wiring diagrams, using actual HVAC units. They gain hands-on experience with heat pumps, oil, gas, and electric forced air HVAC systems. Typical lab projects i...
    MED 123 - Business Presentation (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...This course provides instruction in developing presentation materials. Students create a variety of charts, graphs and interactive presentations. Microsoft PowerPoint enables users to quickly create high-impact, dynamic presentations, while integrating workflow and ways to easily share informati...
    a section of the Business Presentation course in Medical Assistant - MED
    AU 112 - Basic Automotive Electrical Systems (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    Email Email More info More Info
    Sam Perez Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers basic electrical theory, wiring diagrams, test equipment, diagnosis, repair, and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be ab...
    AU 110 - Intro to Automotive Technology (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mr. Ken I. Waggener Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of automotive technology. Topics include familiarization with vehicle systems along with identification and proper use of vario...
    IN 242 - Employment Preparation (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    MA 114 L - Machine Lab (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Classroom theory on the operation of drill presses, band saws, bench grinders, and basic hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping.
    a section of the Machine Lab course in Machine Technology - MA
    IN 221 - Instrumentation IV (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Carlos Sanchez Sanchez-Torres Email Email More info More Info
    Instrumentation IV covers advanced control concepts such as configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators, fluid power systems, control valves, and valve positioners.
    What

    Click on a content type above to refine your results.