Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • ET 222 - Electrical Theory III (2019 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Adam Rieker Email Email More info More Info
    Students will build a foundation of transformer theory, solid state electronics, printed circuit boards, soldering, and troubleshooting electronics.
    ET 112 - Electrical Theory I (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    rd Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Beginning with atomic structures, this course will introduce the basic theory of electricity along with solving for voltage, current, resistance and wattage in different circuit configurations using Ohm’s and Watt’s laws. Students will also identify and draw single-phase and three-phase systems used...
    a section of the Electrical Theory I course in Electrical Technology - ET
    ITC 703 - Employment Search: Resumes & Interv (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    trey Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Designed to prepare the student to mount an effective job search. Resume preparation, interview skills, and the job application process are covered as the portfolio preparation process is completed.
    PM 142 - Mastercam Mill Level One II (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Students use Mastercam to create two- and three- dimensional geometry and tool paths. Topics include tool path selection, proper use of stock setup, tool libraries, and tool path verification.
    PM 122 - Machine Tool Practices II (2018 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    ...Covers operation and setup theories of the vertical milling machine. Topics covered include face milling, rough/finish milling, hole layout, offset boring head, drilling, and tapping. Also covered are heat treating of materials, material properties, and material application. Introductions to the hor...
    AET 110 - Intro to Agricultural Equipment (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Hilaire Email Email More info More Info
    matt Bishop Email Email More info More Info
    ...This course covers workplace safety, hazardous materials and environmental regulations, use of hand tools, service information resources, basic concepts, systems, and terms of agricultural equipment technology. Topics include familiarization with equipment systems along with identification and prope...
    BTA 213 - Computerized Accounting Concepts (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course will provide a hands-on approach to learning QuickBooks that incorporates a thorough understanding of the software while applying knowledge of the accounting cycle.
    IN 122 L - Lab & Shop Projects (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    ET 231 - NEC/Utility (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...This course will discuss the code requirements for wiring a dwelling unit, photovoltaic systems and cover articles relating to commercial wiring methods. The minimum standards of outdoor branch circuits and feeders, services, grounding and bonding, hazardous locations, and pools will also be covered...
    a section of the NEC/Utility course in Electrical Technology - ET
    RE 140 - Resident & Light Commerical HVAC II (2023 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    t Email Email More info More Info
    Andrew Freeburg Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...In this section, students delve into heating systems, including fossil fuel units such as natural gas, LP gas, oil heating systems, electric heating, and heat pump systems. The course covers the combustion and venting process in relation to fossil fuel heating systems and introduces duct design prin...
    AET 121 - Fuel Systems (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Michael John Roy Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    This course focuses on fuel system theory, design, maintenance, diagnosis, and repair of mechanical and electronic fuel systems used in agriculture and construction equipment.
    a section of the Fuel Systems course in Agricultural Equipment Tech - AET
    IN 122 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...Apply classroom skills to lab assignments, with requirement to document labs in Microsoft Word and use of Turnitin.com for electronic grading. Training and use of AutoCAD to draw Schematics and wiring diagrams for labs, and drawing to scale. Further development of technical writing skills. Emphasis ...
    BTA 114 - Business English I (2022 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course emphasizes basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate a grasp of basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum of errors in sentence str...
    ITC 233 L - Laboratory Instruction (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom to industry standard telephone systems and related equipment. Hands-on experience with industry standard tools and practices is accomplished in the installation of copper and fiber optic cable systems for voice and data networks. ...
    EL 504 L - Lab & Shop Projects (2014-2015 SUMMER TRIMESTER)
    Mon, Tue, Wed, Thu: 7-4:00 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lab & Shop Projects
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    BTA 132 - Introduction to Business (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Tori Bower Email Email More info More Info
    Students are taught how to apply the basic concepts of business. Topics include the business environment, business formation, financing a business, management motivation and leadership, and operations management.
    RE 211 L - Lab & Shop Projects (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:15-7:10 PM @ *
    on Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This comprehensive laboratory and shop course provides hands-on evaluation and repair opportunities with a diverse array of operational refrigeration equipment. Students gain practical experience in setting, adjusting, evaluating, programming, and wiring a wide variety of commercial refrigeration eq...
    RE 211 L - Lab & Shop Projects (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-4:10 PM @ *
    orres Email Email More info More Info
    Ryan M. Hoffert Email Email More info More Info
    ...This comprehensive laboratory and shop course provides hands-on evaluation and repair opportunities with a diverse array of operational refrigeration equipment. Students gain practical experience in setting, adjusting, evaluating, programming, and wiring a wide variety of commercial refrigeration eq...
    MA 123 L - Machine Lab (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    Classroom theory on the operation and set-up of engine lathes will be applied in the shop. Operations will include turning, thread cutting, grooving, drilling, and tapping. Also covered are the set-ups of fourjaw chucks, follower rests, and steady rests.
    a section of the Machine Lab course in Machine Technology - MA
    ET 230 - Safety (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrle9b6ebd0-9594-4626-b2d9-67dadf03d2de@)">Email Email More info More Info
    Matt D. Boynton Email Email More info More Info
    Students will distinguish safety hazards on a construction job site. The Electrical Department holds weekly safety meetings that include a safety demonstration showing the way to use tools, ladders, and other equipment needed in the electrical trade.
    a section of the Safety course in Electrical Technology - ET
    PM 132 - Mastercam Mill Level One I (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    IN 213 L - Lab & Shop Projects (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    ...Process control theories learned in class including Proportional, Integral and Derivative actions are applied to live process control loops including flow and level labs. A variety of developed lab diagrams including Piping and Instrument Diagrams (P&ID’s) and Ladder Diagrams are designed following ...
    BTA 133 - Introduction to Marketing (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    href="(@@emailUrl218f746f-35fc-4a92-91b3-d2d75a9cb6c2@)">Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students are taught how to apply the basic concepts of marketing. Subjects included are an overview of marketing, analyzing market opportunities, product decisions, promotion and communication strategies, and pricing decisions.
    PM 123 L - Machine Lab (2024 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...Classroom theory on the operation and setup of the vertical and horizontal milling machines will be applied in the shop. Operations will include face milling, rough/finish milling, hole layout, drilling, and tapping. Also covered are general machine setups including dialing vises and head tramming. ...
    BTA 135 - Human Relations (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:30 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Topics including job satisfaction, motivation, learning and decision making, and personality and cultural values will be covered as they relate to job performance and organizational commitment, all with a focus on scientific evidence.
    IN 220 - Industrial Computing I (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Sanchez-Torres Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Curriculum explores configurations of distributive process control, hardware implementations, and plant loop communications all utilizing control simulators.
    IN 244 E - Externship (2025 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    ET 143 L - Lab & Shop Projects (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Forrest D. Buchmann Email Email More info More Info
    Students will develop, use, and create programs. Students will also use logical diagrams to control the desired process by analyzing inputs and updating outputs by monitoring devices and troubleshooting the written program.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    IT 213 - Cisco Networking I B Lab (2023 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    gana Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...This course continues the basics of networking focusing on IP addressing, transport, and application services. The switching, routing and end devices covered in Networking I now will compromise a separate IP subnet routing different application services across the network. By the end of the course, ...
    IN 233 L - Lab & Shop Projects (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Douglas E. Oswalt Email Email More info More Info
    ...Students will have the opportunity to design, build and integrate lab projects using a variety of Programmable Logic Controllers (PLC’s) and a Distributed Control System (DCS). Labs will be created using both discrete and analog input signals while applying learned programming languages to further d...
    IT 140 - Network Server OS Configuration (2022 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    ...Installation and configuration of a network server operating system is covered. Configuration of virtual machines/networks, DHCP/DNS services, domain controllers, Active Directory, and group/security policies are also introduced. Basic computer/server networking is demonstrated as students learn the...
    MED 126 - Human Body in Health & Disease I (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    Lilia Ornelas Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    Ginger Mellick Email Email More info More Info
    ...An introduction to the structure and funciton of the human body utilizing a system approach. Emphasis placed on human anatomy as well as the physiology of the cell, skeletal system, muscular system, nervous system, cardiovascular, respiratory, urinary, reproductive, endocrine, digestive, lymphatic, ...
    PM 130 - GD&T I (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    ...This course covers the fundamental geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics include basic dimensioning and tolerancing rules, definitions, symbols, form variation, and basic fits of mating parts. Other topics include datums, material conditions, a...
    a section of the GD&T I course in Precision Machining & Manufact - PM
    MOA 223 E - Medical Office Practicum Externship (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    ITC 501 L - Cisco Laboratory Instruction I (2014-2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    gana Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jennifer McMurtrey Email Email More info More Info
    Cisco Laboratory Instruction I
    AET 123 E - Externship (2025 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    oy Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Agricultural Equipment Tech - AET
    CST 130 - Exterior Finishing (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    This course includes the installation, finishing of wall coverings (siding installation), and exterior trim. Students will install windows, doors, waterproofing, and utilize tools specifically designed for exterior finishing. Students will practice using ladders and scaffolds.
    a section of the Exterior Finishing course in Construction - CST
    CST 120 - Construction Concrete (2026 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Travis Bradley Williams Email Email More info More Info
    Students will explore forming methods, footings, foundation walls, slabs, and the handling and curing of concrete. Students will study placing procedures and mix designs.
    a section of the Construction Concrete course in Construction - CST
    IN 212 - Motor Control (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mr. Patrick J. Jones Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    PM 132 - Mastercam Mill Level One I (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    This course teaches students how to create two- and three- dimensional models using Mastercam software. Topics include creating geometry, filleting, and trimming. Other topics include the use of mirror image and translation.
    RE 230 - Industr Heating & Cooling Systems I (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    g Email Email More info More Info
    Eric M. Greeno Email Email More info More Info
    Shane L. Tillett Email Email More info More Info
    ...In this advanced course, students are introduced to industrial heating and cooling systems and their various components, including variable air volume (VAV) systems, boilers, chillers, cooling towers, hot water systems, geothermal heat pumps, electrical theory, control circuits, wiring schematics, v...
    MA 230 - Geo Dimensioning & Tolerancing III (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    A continuation of Geometric Dimensioning & Tolerancing II, this course further develops the geometric dimensioning and tolerancing skills needed to interpret industrial drawings. Topics covered include form tolerances, orientation tolerances, and location tolerances.
    IN 140 - Physics II (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Uniformly accelerated motion is covered in this section of physics. Covered topics include Newton’s second law; work, energy, and power; impulse and momentum; simple machines; elasticity; fluids at rest; fluids in motion; temperature and expansion; quantity of heat; transfer of heat; and thermal pro...
    a section of the Physics II course in Industrial Computing & Process - IN
    IN 143 L - Lab & Shop Projects (2018 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Lawrence Patrick Dagdagan Email Email More info More Info
    ...Temperature, Pressure, Level and Flow measuring instruments are studied in this section. Analog and Intelligent Transmitters and Transducers are covered in this section to include industry practiced calibrations and documentation standards. Students will apply time management, written communication ...
    MOA 140 - Anatomy & Physiology II (2015 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Angela B. Lundberg Email Email More info More Info
    ...This course takes a more advanced look at human anatomy and physiology by building on the basics learned in Anatomy & Physiology I. Students will take an in-depth look at the axial skeletal system, the appendicular skeletal system, articulations, axial muscles, appendicular muscles, the brain an...
    BTA 142 - Business Ethics (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides opportunities for students to learn through discussion.
    IT 133 - Computer Software Fundamentals Lab (2020 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Joseph W Hewitt Email Email More info More Info
    Application of the technical knowledge acquired in the classroom is applied to computer software in a lab environment. Students will install, configure, manage, and troubleshoot multiple types of computer operating systems and software applications to verify operation and prove theory.
    IT 141 - Network Server OS Configuration Lab (2025 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    t Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network server operating systems in a lab environment. Students will install, configure, manage, and troubleshoot multiple types of network server operating systems and virtual networks to verify operation and prove theor...
    BTA 610 - Payroll Accounting Concepts (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7-4:30 PM @ *
    trey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Kovis Email Email More info More Info
    Payroll Accounting Concepts
    PM 120 - Industrial Mathematics II (2017 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Jay E. Wellner Email Email More info More Info
    ...This course covers the fundamentals of plane geometry. Common shop problems are solved by applying the geometric principles of triangles, common polygons, and circles. Other topics covered include area and volume calculations, trigonometric functions as they apply in the machine trades, calculations...
    What

    Click on a content type above to refine your results.