Search features

Search Results

Results for
  • Results will be returned that contain all of the terms entered. For example searching for bus schedule would return anything that contains both bus and schedule in any order but not only bus or schedule by themselves.
  • Searching while you are within a course or group will return results found within that course or group. If there are no results within the course or group you will be shown results for your term from everywhere.
  • You can use + or - to include or exclude search results. For example, the search +schedule -bus will return results that contain the word schedule but not the word bus.
  • Put a word or phrase in quotes to find exact matches. Searching for "bus schedule" will search for the exact phrase bus schedule with no other words between those two.
  • You can add * at the end of a term to find results that start with that term. Searching for book* will return results for book, books, bookmark, and bookmarks. (You can also add * in the middle of a term)
  • Common words such as and, the and of are excluded from the search. To force them to be included, put a + in front of them.
  • The characters && || ! ( ) { } [ ] ^ ~ * ? : \ have special functions and aren’t searched for. If you need to find results that include one of those, you can put a \ in front of it and it will be searched for like a regular character. For example Abbott \& Costello or Who’s on first\?
  • IN 243 L - Lab & Shop Projects (2020 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    ...Students will use hand tools, DMM’s, and process documenting calibrators to verify proper operation and calibration of lab equipment. Students will download and install industry specific SCADA software to create graphic screens in order to visualize and capture live lab data analytics for process op...
    RE 221 L - Lab & Shop Projects (2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    on Email Email More info More Info
    Justin L. McRitchie Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...This hands-on laboratory and shop project course enables students to further develop by working with a diverse range of operational refrigeration equipment, including walk-in coolers, freezers, ice machines, reach-in units, undercounter units, and supermarket rack systems. Students gain knowledge in...
    ITC 243 E - Externship (2016 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    r Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Qualifying students have the option of obtaining practical experience in a workplace environment in lieu of the last month of training on campus. Externships must relate to the training that would occur in the last quarter of ITCS and must be approved by the Department Head. If the student does ...
    a section of the Externship course in Info Tech & Comm Systems - ITC
    IN 133 L - Lab & Shop Projects (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Gerry E. Ries Email Email More info More Info
    Design and build operational amplifier circuits, measure electronic circuit parameters. Learn calibration, and industrial applications for temperature transmitters, Arduino micro controllers, and robotics concepts. Understand, explain, and document labs while adhering to defined safety standards.
    BTA 113 - Spreadsheets (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Students learn how to use Microsoft Excel for basic and more advanced spreadsheet creation including tables, charts, PivotTables, and PivotCharts. Students will practice creating formulas using absolute and relative cell references and using functions like COUNTIF and VLOOKUP to answer questions and...
    a section of the Spreadsheets course in BUSINESS TECH. & ACCOUNTING - BTA
    IN 301 - Operational Amplifiers (2014-2015 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Loop concepts, calibration methods, analog transmitters, transducers, controllers, process variables, and ISA books are included.
    RE 230 - Industr Heating & Cooling Systems I (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    t Email Email More info More Info
    Salvador E. Rubio Email Email More info More Info
    ...In this advanced course, students are introduced to industrial heating and cooling systems and their various components, including variable air volume (VAV) systems, boilers, chillers, cooling towers, hot water systems, geothermal heat pumps, electrical theory, control circuits, wiring schematics, v...
    PL 122 - Math & Blueprint Reading II (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:15-3:45 PM @ *
    s Email Email More info More Info
    Tim M Bushnell Email Email More info More Info
    A continuation of Math & Blueprint Reading I, students will study plumbing math by calculating volumes of cubes and cylinders. Students will expand upon drawing fundamentals, read schematics, and diagram fluid power systems.
    WLD 112 - Introduction to Print Reading (2021 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    IN 244 E - Externship (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students are given the opportunity to gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Industrial Computing & Process - IN
    MOA 117 - The Human Body in Health & Disease (2024 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    ...An introduction to the structure and function of the human body utilizing a system approach. Emphasis placed on the basics of human anatomy as well as the physiology of the skeletal system, muscular system, nervous system, cardiovascular, respiratory, urinary, reproductive, endocrine, digestive, lym...
    MOA 145 - Medical Reimbursement II (2021 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    This course is a continuation of Medical Reimbursement I. Students will continue to work through the same objectives for Medical Reimbursement I.
    BTA 130 - Fundamentals of Accounting (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    whouse Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Mrs. Valerie Ryan Email Email More info More Info
    ...In an introduction to accounting, students are taught accounting concepts and procedures to include debits and credits, the general journal, general ledger, accounting cycle, banking and cash handling procedures, and payroll entries. The objective of this course is to give students a foundation in a...
    IT 230 - Infrastructure & Cabling Standards (2022 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    Equips the student to pursue careers in the network infrastructure industry. Cabling applications, installation and testing are covered. The history of the industry and industry terms are presented. National Electrical Code and industry cabling and equipment standards are covered.
    EL 234 E - Externship (2015-2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Zike Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Students who have a job offer as an electrician may leave the program and work in the field under a training extern agreement with Perry Technical Institute, the employer, and the student. Completion of an externship packet is required.
    a section of the Externship course in Electrical Technology - EL
    MOA 140 - Anatomy & Physiology II (2016 SUMMER QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    berg Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lashel Church Email Email More info More Info
    ...This course takes a more advanced look at human anatomy and physiology by building on the basics learned in Anatomy & Physiology I. Students will take an in-depth look at the axial skeletal system, the appendicular skeletal system, articulations, axial muscles, appendicular muscles, the brain an...
    IN 120 - Solid State Devices (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Max E. York Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    AU 132 - Automotive & Light Duty Diesel (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu, Fri, Sat: 4:30-10:00 PM @ *
    ell Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dusty Morrill Email Email More info More Info
    ...This course covers the diagnostic and repair procedures for automotive and light duty diesel engines. Topics include common tools and practices used while servicing diesel engines. Students will identify and learn the variances of today’s diesel fuels. Base engine fundamentals and condition diag...
    IN 120 - Solid State Devices (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Max E. York Email Email More info More Info
    ...The curriculum covers basic definitions, semiconductor diodes, rectifier diode circuits, basic DC power supply, and transformer usage. DC power supplies – single phase, transistor as DC switch, transistor as an AC amplifier, silicon-controlled rectifiers, triac, diac, and unijunction transistor, and...
    IN 212 - Motor Control (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Jones Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students learn about lock-out tag-out, electric symbols, ladder diagramming, contactors, single-phase, three-phase, DC motors, and variable speed devices.
    MED 132 - Medical Terminology (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    berg Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Lashel Church Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Kindra L. Heintz Email Email More info More Info
    This course is designed to reach students to accurately spell, pronounce, and define common medical terms related to major disease processes, diagnostic procedures, labroratory tests, abbreviations (including legal), drugs, and treament modalities.
    a section of the Medical Terminology course in Medical Assistant - MED
    PM 113 L - Machine Lab (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...Classroom theory on the operation of drill presses, band saws, bench grinders, and hand tools will be applied in the shop. Operations performed will include filing a block square, hacksaw use, precision hole layout, drill bit sharpening, drilling, and tapping. Classroom theory on the operation and s...
    ET 123 L - Lab & Shop Projects (2017 Fall Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Raymond P. Cyr Email Email More info More Info
    Students will use electrical components and breadboards to assemble circuits and verify electrical quantities determined in classroom calculations.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    MA 213 L - Machine Lab (2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Dan Steinmetz Email Email More info More Info
    Students will complete a series of projects designed to hone the skills needed in industry. They will operate a job shop style machine shop doing work for customers and participate in a final class machining project.
    a section of the Machine Lab course in Machine Technology - MA
    IN 401 - Physics II (2014-2015 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    ck Dagdagan Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Process and instrumenation diagramming, loop sheets, electrical diagramming, values, motors, proportional, integral, and derivative controls, tuning controllers, fluid power systems, and smart devices.
    a section of the Physics II course in Industrial Computing & Process - IN
    CST 142 E - Externship (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    a href="(@@emailUrlc14aec54-5127-4659-ac0b-9d290ee98798@)">Email Email More info More Info
    Students will gain field experience under an externship agreement with Perry Technical Institute, the employer, and the student. Completion of the externship packet is required. If the student does not obtain an externship, completion of a capstone project is required.
    a section of the Externship course in Construction - CST
    EL 232 - Safety Meetings (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    ...Each week there will be a safety meeting for the Electrical Department. The meeting has a safety curriculum and a safety video that are covered with the students. Accident reports and unsafe condition reports are reviewed. Safety demonstrations are performed to show the correct way to use tools,...
    a section of the Safety Meetings course in Electrical Technology - EL
    ET 213 L - Lab & Shop Projects (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    href="(@@emailUrlda411e77-8b06-4607-be0a-2393e431182f@)">Email Email More info More Info
    Robert J. McChesney Email Email More info More Info
    Students will use technical manuals to wire variable frequency drives to change the speed of AC motors using various analog components. They will also monitor the power quality on various circuits using analyzers and size capacitors to correct poor power factor.
    a section of the Lab & Shop Projects course in Electrical Technology - ET
    EL 134 L - Lab & Shop Projects (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    za Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    Matthew E. Shipley Email Email More info More Info
    Using ladder diagrams, students install the wiring to motor control lab stations. Students will also do troubleshooting after the instructor bugs the station.
    a section of the Lab & Shop Projects course in Electrical Technology - EL
    WLD 112 - Introduction to Print Reading (2023 Fall Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Ryan Mitchell Harris Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    RE 140 - Resident & Light Commerical HVAC II (2018 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:15-4:10 PM @ *
    bio Email Email More info More Info
    Dan J. Henderson Email Email More info More Info
    Garet D. Gasseling Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...In this section, students delve into heating systems, including fossil fuel units such as natural gas, LP gas, oil heating systems, electric heating, and heat pump systems. The course covers the combustion and venting process in relation to fossil fuel heating systems and introduces duct design prin...
    WLD 112 - Introduction to Print Reading (2022 Spring Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    y Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    Diana Funkhouser Email Email More info More Info
    ...This course offers an introduction to welding symbols and blueprint reading. Students gain the knowledge to interpret lines, dimensions and notes used on blueprints in the welding and fabrication trades. Mathematic fundamentals are applied in such manner that reflects industry standards, angular mea...
    AU 140 - Automotive Drivetrain Systems (2017 Winter Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    ...This course covers operation, diagnosis, service, and repair of automatic transmissions/transaxles. Topics include hydraulic, pneumatic, mechanical, and electrical/electronic operation of automatic drivetrains and the use of appropriate service tools and equipment. This course will also cover manual...
    IN 241 - Industrial Computing II (2024 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    a href="(@@emailUrl448cea12-2df4-4010-a66a-99b99c55e9dc@)">Email Email More info More Info
    Casey J. Floren Email Email More info More Info
    Industrial Computing II expands upon hardware and software configurations and implementation utilizing software packaged for personal computers that provides interfaces between operator and controller. HMI software configurations on PLC-controlled simulators are also explored.
    AET 112 - Hydraulics and Implements (2017 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Christian St. Hilaire Email Email More info More Info
    Nick M. Romero Email Email More info More Info
    ...During this course, students will be exposed to hydraulic equipment. Students will study friction, lubrication, wear, lubricant maintenance and oil analysis, hydraulic fluid composition, and hydraulic applications. Students will learn proper techniques for operation of implements including settings,...
    WLD 114 - Cutting, Gouging & Torch Techniques (2017 Summer Quarter)
    Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Jason Lamiquiz Email Email More info More Info
    Leonard Thompson Email Email More info More Info
    This course covers manual and semi-automatic cutting operations such as oxyfuel, plasma, carbon-arc cutting/gouging and lancing. Students are given the opportunity to develop skills using band saws, iron workers, and related metal working equipment.
    ITC 243 E - Externship (2016 SPRING QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    Email Email More info More Info
    Andy J. Fischer Email Email More info More Info
    ...Qualifying students have the option of obtaining practical experience in a workplace environment in lieu of the last month of training on campus. Externships must relate to the training that would occur in the last quarter of ITCS and must be approved by the Department Head. If the student does ...
    a section of the Externship course in Info Tech & Comm Systems - ITC
    IT 231 - Infrastructure & Cabling Stds Lab (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-3:30 PM @ *
    r Email Email More info More Info
    ...Application of the technical knowledge acquired in the classroom is applied to network cabling & infrastructure in a lab environment. Introduction to Power over Ethernet (PoE) cable and device installation will also be covered in accordance with the Washington State Limited Energy System guidelines....
    EL 240 E - Externship (2018 Winter Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Email Email More info More Info
    Mr. Ronald Lee Zike Email Email More info More Info
    Michael Ryan Yusi Email Email More info More Info
    ...On-the-job training projects doing hands-on electrical wiring installations in residential and commercial buildings. All trainee electrical installations are supervised by a journeyman electrician and inspected by the Department of Labor & Industries. Completion of an externship packet is requir...
    a section of the Externship course in Electrical Technology - EL
    WLD 140 - Fabrication Techniques (2026 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    Email Email More info More Info
    Zeus Wilson Email Email More info More Info
    ...During this course students will work with all related shop equipment. Students will perform hands-on welding projects using various welding processes learned in earlier quarters. During these projects students are taught to overcome fit-up problems, control warp age/distortion and other tolerance c...
    EL 111 - DC Fundamentals I (2015-2016 WINTER QUARTER)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    usi Email Email More info More Info
    Michael G. Tucker Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    ...Electrical safety, atomic structure, basic electrical definitions, electron flow theory through electrical circuits, conventional flow current flow, and series, parallel and series-parallel combination circuits solving using applied electrical mathematics used for theory utilizing Ohm’s Law and ...
    a section of the DC Fundamentals I course in Electrical Technology - EL
    ITC 121 - Wireless Technology (2014-2015 FALL QUARTER)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    trey Email Email More info More Info
    Nathaniel Hull Email Email More info More Info
    Jeanine M. Benoit Email Email More info More Info
    ...Radio frequency theory, noise bandwidth, analog and digital modulators. RF transmission and reception, propagation, transmission lines, and antenna systems are covered. Lab projects enable the application of the technical knowledge acquired in the clasroom to RF modulators, radio receivers, antenn...
    PTD 100 C1 - Professional Truck Driving (2024 PTD Summer)
    Mon, Tue, Wed, Thu: 7-3:30 PM @
    o Email Email More info More Info
    Donald Holman Email Email More info More Info
    Professional Truck Driving
    BTA 221 - Accounting Integration (2020 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    Ms. Mardell Newhouse Email Email More info More Info
    This is a project-based course that will provide a hands-on simulation project. The project is designed to incorporate the accounting and QuickBooks knowledge gained in previous courses, through realistic practice.
    WLD 121 - Gas Metal Arc Welding (2023 Summer Quarter)
    Mon, Tue, Wed, Thu: 7-3:30 PM @ *
    href="(@@emailUrl1698e5d6-4662-4447-88e4-93ca412f1a6b@)">Email Email More info More Info
    Scott M. Hamway Email Email More info More Info
    Brody Sorenson Email Email More info More Info
    Students receive instruction regarding the process and theory of gas metal arc welding. Students will be exposed to related equipment, setup procedures, and safety requirements. During this course students will also be introduced to the fundamentals and practices of pipe welding.
    a section of the Gas Metal Arc Welding course in Welding Technology - WLD
    IN 242 - Employment Preparation (2019 Fall Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    n Email Email More info More Info
    Tony J. Nirk Email Email More info More Info
    Students will create a resume to be used in the job search and develop a list of potential employers for setting interview schedules. Interviewing techniques will be discussed and feedback will be given from practice interviews. Students will also review material from previous sections.
    BTA 122 - Business Presentation (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course provides instruction in delivering business presentations and developing presentation materials. Students will create a variety of charts, graphs, and interactive presentations with the primary use of PowerPoint. Students will be encouraged to complete the MOS certification in PowerPoint...
    BTA 125 - Business English II (2019 Spring Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:00 PM @ *
    yan Email Email More info More Info
    ...This course is a continuation from Business English I and basic punctuation and grammar rules and covers sentence structure. The focus is on writing sentences which demonstrate basic syntax and usage and writing sound paragraphs which express a main idea clearly and develop it fully with a minimum o...
    MOA 131 - Health Care Law & Ethics (2024 Summer Quarter)
    Mon, Tue, Wed, Thu: 7:30-4:15 PM @ *
    radis Email Email More info More Info
    ...This course examines the ethical challenges facing individuals and businesses in modern society. The course utilizes case studies of professionals working in various areas of business and provides guest speakers with real-world experiences. Great emphasis is placed on HIPAA and Washington State priv...
    ET 240 E - Externship (2019 Summer Quarter)
    Mon, Tue, Wed, Thu: 6:50-4:05 PM @ *
    Zike Email Email More info More Info
    Adam Rieker Email Email More info More Info
    ...Students will complete on-the-job training projects doing hands- on electrical wiring installations in residential and commercial buildings. While working for the school, all trainee electrical installations are supervised by a (01) journey level electrician and the work is inspected by the Departme...
    a section of the Externship course in Electrical Technology - ET
    What

    Click on a content type above to refine your results.